Close

Results 1 to 6 of 6
  1. #1
    Join Date
    Jan 2016
    Posts
    46
    Rep Points
    88.8
    Mentioned
    4 Post(s)
    Rep Power
    0


    Yes Reputation No

    VM 6466 Single Turbo kit

    I have decided that I don't need to have two BMW FI builds going on at the same time so I am selling this kit that I bought used. (I am focusing on my e36 build for now) I never installed it but if I remember correctly it has approximately 5k miles on it. The compressor housing is polished and the 3.5 down pipe merges to the stock exhaust. Manifold and downpipe are wrapped in DEI heat wrap. I will post pictures this weekend.
    Brand new this would cost $5795 without shipping.
    I am asking $4,995 shipped. That is at least $1,000 off and you won't have to wait for the kit to be built it will ship right away.

    Description of parts from VM
    - 2 piece 304 Stainless SCH10 top mount manifold all Tig welded by hand and purged.
    -3.5" 304 Stainless downpipe (The only kit offered with a 3.5" downpipe on the market)
    -304 Stainless dumptubes or recirculated wastegate tubes
    -2.5" Aluminum charge pipe
    -Water pump inlet tube with Billet flange
    -Your choice of Precision Ball Bearing Turbo
    -2 Tial MV-S wastegates (I am an authorized Tial distributor so you can be assured they are genuine TIAL and not a knock off.)
    -Single Turbo BMS airfilter
    -Mac Solenoid with PNP harness
    - -4 AN stainless braided hoses and fittings for all of the wastegate reference lines (Also the only kit to offer this, this is very important given how tightly packed everything is in the hottest portion of the engine bay.)
    -Coolant Tank relocation brackets
    - Billet Oil drain flange
    --10 AN stainless hardline oil drain tube
    -Billet adapter for oil feed to the block
    -Billet block offs for the coolant ports in the head
    -6 feet of heater hose and fittings to relocate the coolant tank
    - -4 Stainless braided hose for oil feed with fiberglass insulation to shield it from the heat
    -Hardware for manifold where shorter nuts are needed and well as all the required bolts and clamps
    -2 2.5" Silicone Couplers and clamps
    -90 degree Silicone Coupler for the water pump inlet
    - Turbo Blanket


  2. #2
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    140,501
    Rep Points
    42,506.0
    Mentioned
    2455 Post(s)
    Rep Power
    426


    Yes Reputation No
    GLWS
    Three sets of brand new 991.2 3.0 headers for sale: Kline, Fabspeed, and Vektor Ceramic Coated

    IPD plenum for Porsche 991.2 3.0 for sale: $650

  3. #3
    Join Date
    Jan 2016
    Posts
    46
    Rep Points
    88.8
    Mentioned
    4 Post(s)
    Rep Power
    0



    Yes Reputation No
    I forgot to mention, the previous owner of this kit told me he was having issues with the MAC Solenoid so I would suggest getting a new one ($50)

  4. #4
    Join Date
    Jan 2016
    Posts
    46
    Rep Points
    88.8
    Mentioned
    4 Post(s)
    Rep Power
    0



    Yes Reputation No
    Bump, I have a few pictures on my phone feel free to text me if interested 913-669-5039

  5. #5
    Join Date
    Jan 2016
    Posts
    46
    Rep Points
    88.8
    Mentioned
    4 Post(s)
    Rep Power
    0



    Yes Reputation No
    $4500 + shipping
    Attached Images Attached Images    

  6. #6
    Join Date
    Jan 2016
    Posts
    46
    Rep Points
    88.8
    Mentioned
    4 Post(s)
    Rep Power
    0



    Yes Reputation No
    Bump

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •