Close

Search:

Type: Posts; User: MLMHeadworks

Search: Search took 0.00 seconds.

  1. N54: T15 compressor wheel, and I believe the turbine...

    T15 compressor wheel, and I believe the turbine wheel has more blades on it can't remember. But it's in the stock td03 housing. Rob has them rated for 450-525 horsepower, and the math I've run...
  2. N54: Might as well pitch in here too. Put a set of RB...

    Might as well pitch in here too. Put a set of RB two's on an e90 and I'm pretty impressed with them, its one of the beta sets as well. The car is at 430 to the wheels as it sits, hitting 18psi but...
  3. Replies
    1
    Views
    156

    N54: Fuel-it Stage 2 lpfp issues

    Alright I wanted to start a thread to see if anyone has had any issue similar to this and has defeated it, or to start some brain storming. I've been working on an '09 LCI n54 car that has RB stage...
  4. N54: The tables can be adjusted. The limiters are...

    The tables can be adjusted. The limiters are just a redundancy to potentially save your motor if something happens with the solenoids or oil pressure. But I haven't found where the cam's parked...
  5. Gotcha, cool, look forward to seeing more, whats...

    Gotcha, cool, look forward to seeing more, whats base fuel pressure if you don't mind me asking
  6. Replies
    35
    Views
    1,430

    S54: nope

    nope
  7. N54: I would limit the phaser travel in any case if...

    I would limit the phaser travel in any case if they have kits on the market just as a redundancy.
  8. What's up with that torque dip past 5000? Knock...

    What's up with that torque dip past 5000? Knock or are you moving the cams?
  9. Replies
    35
    Views
    1,430

    S54: Don't flatter youself... This seems like an...

    Don't flatter youself... This seems like an attention grab now. Sorry i wasted my time.
  10. Replies
    35
    Views
    1,430

    S54: depending on your duration you may have too. But...

    depending on your duration you may have too. But if you want a street car that is actually a decent street car you'd be better off keeping it. I haven't messed with VANOS but i have worked with ls...
  11. Replies
    35
    Views
    1,430

    S54: Aluminum rods are a wear and tear item. thats...

    Aluminum rods are a wear and tear item. thats why you only see them on 1/4 mile cars that get torn apart after every pass. I don't know what street cars are running these but i have a feeling theyre...
  12. Replies
    35
    Views
    1,430

    S54: Aluminum rods on a street car and you want the...

    Aluminum rods on a street car and you want the highest duration possible on a street car.... let us know when you clap a valve into a piston...
  13. Replies
    35
    Views
    1,430

    S54: In a quick write up there's a few things id like...

    In a quick write up there's a few things id like to bring up. The most common issue people get them selves into is "over camming" their engines. You need to consider application, rpm range (can...
  14. N54: Just some back ground on me. I'm based in...

    Just some back ground on me. I'm based in Houston, doing business through word of mouth at the moment while I'm in school. Not trying to market anything at the moment just here to share data and ask...
  15. N54: @Sticky...

    @Sticky, have ported cobra b heads, intake flowed 300cfm with stock valves this sets is going on a procharged road race car, several sets of cathedral ports, flow on those heads really depends on the...
  16. N54: Sticky, sorry for the late reply. Yes I do just...

    Sticky, sorry for the late reply. Yes I do just haven't ported a set for this platform.
  17. N54: What depression where these flowed at?

    What depression where these flowed at?
Results 1 to 17 of 17