Close

Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2010
    Posts
    2,186
    Rep Points
    2,134.5
    Mentioned
    25 Post(s)
    Rep Power
    22


    Yes Reputation No

    Eurotuner 3F & GINTANI M3

    http://www.eurotuner.com/featuredveh..._m3/index.html

    It's 3am and the owner of this '08 BMW M3 is driving home from a car show in Southern California. The highway is dark, secluded and quiet as a grave. The only thing keeping him awake is the radio. He takes a careful look in the rearview for approaching vehicles - nobody's coming. His eyes squint at the long straightaway ahead for potential speed traps, but he sees nothing. Finally, he has an opportunity to test the limits of his supercharged 4.0 V8 Coupe.
    With both hands firmly grasping the steering wheel, he downshifts into fourth with the paddle shifters, igniting the seven-speed DCT transmission. From 80-130mph, the Bimmer accelerates like a cannonball fired into battle. At 130mph, he shifts into top gear and the speedo continues to climb like a jet. The car feels solid.


    Impressed, he refuses to lay off the gas pedal - 160, 165, 170... The driver finally lifts off the throttle and coasts to cruising level with an uncontrollable smirk.
    If you've driven an E92 M3, you understand what the owner felt. These amazing cars are nothing more than soldiers ready for battle. They're born as experts in power, speed and handling. But if you add aerodynamics, suspension and a supercharger to the equation, they become unstoppable.


    From the factory, the car has a potent 414hp V8 that redlines at 8400rpm. Its weight distribution is near 50/50, optimal for driving twisties. It also has a top speed of 155mph, which is easily achieved on the open road.
    With the E92 M3 thriving on the streets for two years, the tuning options have multiplied. A plethora of brands and parts make it hard to decide what to buy, but this Coupe from 3F Engineering might get your attention.


    According to the shop, everything on the car was fitted for function, but we can't deny it's outright sexy as well.
    New in the scene, 3F (Form Follows Function) started with a group of aerospace engineers. Like most M3 owners, they saw the versatility of BMW's ultimate driving machine. "It's a car you could take to the track on the weekends but also drive everyday," explained Mike Tran, 3F's director of marketing. "So we decided to make aerodynamic products that actually work on the street or track."


    What a drag
    The M3 is limited to 155mph, but with software modifications it can actually reach 180mph without power mods. However, the aerodynamics and chassis components weren't really intended for such speeds. So 3F's engineers fabricated a package to reduce drag and prevent instability in these situations. The parts were tested on an airport runway using sensors to measure airflow and downforce. The team noticed improvement in stability past 120mph, especially when the stock car became noticeably less stable over 150mph.

    According to 3F, its project car remained smooth. And while not track-tested yet, the additional downforce should produce better high-speed traction and cornering.


    The kit is relatively simple and comprises just three parts: a front lip, rear diffuser and trunk spoiler. The lip extends into the large air vents within the front bumper. We were told it's curved upwards to create more flow into the air pockets. The rear diffuser and trunk spoiler also help with downforce. The sides of the diffuser, for example, are designed to reduce lift, while the trunk lip is angled to move airflow downwards.
    3F manufactures its carbon using VARTM technology - vacuum-assisted resin transfer molding. "Other companies use a fiberglass core where they either overlay the carbon or vacuum-bag it with fiberglass and carbon. They do this to save money, but it's still soft and can flex or even warp in the heat," Mike explained. "Once our carbon is dry, so it won't flex."


    All 3F carbon products are one-by-one weave to match the pattern on the M3's carbon roof. And all the California-made products use factory mounting points for easy installation.
    G for power As for the M3's other mods, it has a Gintani supercharger kit under the hood rated at 600hp.

    In our Tuner GP (et 2/10), Gintani finished second in both the dyno and quarter-mile competitions with the same blower used here. This particular car was the first Gintani supercharged with a DCT transmission, but it seems to be holding up well.
    It used the same Vortech T2 blower with its eight-rib pulley as a manual car. The kit also included a larger intake plenum powdercoated white, plus a chargecooler and carbon airbox. "The software was harder to program but the DCT now pulls harder than the manual cars," explained Alex Gintani, founder of Gintani. "It can't handle as much torque as the manual, but the DCT really kicks ass."


    The parts are matched to an Akropovic exhaust - a company known more for its motorcycle components - employing 90mm tips that fit snuggly inside the rear diffuser. With 5.5psi boost, the car dynoed at 512whp and 350 lb-ft on 91-octane.
    Gintani finished the Coupe by switching brakes and suspension. To lower the chassis, KW Variant 3 coilovers were fitted, which also deleted the factory electronic damper control.


    More speed warranted more stopping power, so 15" front and 13.6" rear Brembo big-brakes gave the M3 perfect balance. Massive six- and four-piston front and rear calipers guaranteed the BMW didn't have problems stopping from triple-digit speeds.
    A staggered set of 19" HRE P43 wheels were originally purchased for track use because of the lightweight one-piece forged construction. Capable for the street as well, Falken FK-452 tires were appropriately mounted to provide plenty of traction.

    Being selective with its modifications, this M3 from 3F Engineering is everything you could ask for: power, appearance and status, there's not much out there that can match its form or function.


    Tech Spec

    2008 BMW M3
    Owner: 3F Engineering
    Location: Long Beach, CA
    Occupation: aerodynamics
    Engine: 4.0 liter V8 32v with Gintani Vortech T2 supercharger, eight-rib pulley, powdercoated Gintani intake plenum, chargecooler, carbon airbox and software, Akrapovic titanium exhaust

    Drivetrain: seven-speed DCT transmission


    Brakes: 15'' Brembo front slotted rotors with six-piston calipers, 13.6'' rears with four-piston calipers
    Suspension: KW Variant3 coilovers with EDC module

    Wheels & Tires: 19x9'' front, 19x10'' rear HRE P43 wheels with 245/40 R19 front, 285/35 R19 rear Falken FK-452 tires


    Exterior: 3F Engineering carbon front spoiler, rear diffuser and trunk spoiler
    Interior: stock

    Thanks: Brembo, Falken Tire, Gintani, HMS Motorsports, KW Suspension
    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge
    Current:
    14 Viper TA
    Wsir - 1:28:9
    Buttonwillow C13 - 1:54:1

  2. #2
    Join Date
    Jan 2010
    Location
    Taiwan
    Posts
    570
    Rep Points
    432.9
    Mentioned
    5 Post(s)
    Rep Power
    5


    Yes Reputation No
    i envy you! maybe Eurotuner can do a story of my car someday
    Current: 964 WB, 993, Panamera Turbo

  3. #3
    Join Date
    Feb 2010
    Posts
    614
    Rep Points
    629.9
    Mentioned
    0 Post(s)
    Rep Power
    7


    Yes Reputation No
    Your car is pretty much perfect!! Nice article.

  4. #4
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    120,345
    Rep Points
    32,760.8
    Mentioned
    2133 Post(s)
    Rep Power
    328


    Yes Reputation No
    Getting in EuroTuner is pretty damn awesome.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •