Hi guys. Its been a long time away from this forum. I need advise regarding a high boost supercharged s50b32 which im currently working on. The kit i used is the jaws vt500 which is rated at 11psi with the kits 6rib pulley. Before i installed the kit my car made 172wkw and after the kit was bolted on and installed aa watermeth system it made 296wkw on the same dyno. The motor is stripped and most of the parts have arrived(forged pistons rods ect). My question is what is the maxium boost and power i can get if i go with a 8 or 10rib crank pulley and if anyone can share some light on their sc builds(high boost) on their e36 or e46 m3. Thanks in advance.