Close

Results 1 to 17 of 17
  1. #1
    Join Date
    Nov 2009
    Location
    Simi Valley, CA
    Posts
    8,577
    Rep Points
    10,439.3
    Mentioned
    672 Post(s)
    Rep Power
    105


    Yes Reputation No

    Famoso 2/1 Results

    Hey guys,

    Another great track day at Famoso today. Really good turn out with some quick supercharged M3s, the normal crew (Serg, Adam, Eric, etc), another tune/dp M5, and even a tune/downpipe X6M.

    I ran the new M5 today which is equipped with our Stage1 tune and a few gallons of 100 octane mixed with 91. And it was hauling ass all day. Best run was 11.49@126.72 with a weak 1.97 60'. Lots of 11.5@127 runs. Can't wait to get the ER downpipes on to see how these times improve. Click here to enlarge

    Also had the misfortune of losing to a very quick E63 AMG on his way to a 130mph trap. :brokenheart:

    Took a few runs in Serg's car which ran very well. I'll let him share his results. Click here to enlarge

    Also since I had the VBOX for one of the runs I remembered to go back and check the 0-60 times, etc, after the run. I think these were from one of the 11.5@127 runs. This car is seriously fun. :lol

    Click here to enlarge

    Click here to enlarge

    Click here to enlarge
    Last edited by Terry@BMS; 02-02-2014 at 01:10 AM.
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, N63s, S55s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please see http://www.burgertuning.com/emissions_info.html for more information on legal requirements related to use of BMS parts.

  2. #2
    Join Date
    Dec 2011
    Location
    Vicenza, Italy
    Posts
    4,207
    Rep Points
    3,204.7
    Mentioned
    69 Post(s)
    Rep Power
    33


    Yes Reputation No
    Very nice. I'd sure love to have one of these Click here to enlarge
    2011 335is DCT, looking for new car friends in Italy.

  3. #3
    Join Date
    Sep 2013
    Posts
    47
    Rep Points
    33.0
    Mentioned
    0 Post(s)
    Rep Power
    0


    Yes Reputation No
    Click here to enlarge

  4. #4
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    8,252
    Rep Points
    6,699.0
    Mentioned
    189 Post(s)
    Rep Power
    67


    Yes Reputation No
    @Terry@BMS Nice results!! How was Serge's car doing without meth? Is the pump doing well all by itself with the ethanol content and the RBs? Glad the pump is holding out strong this time around.
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

  5. #5
    Join Date
    Nov 2009
    Location
    Simi Valley, CA
    Posts
    8,577
    Rep Points
    10,439.3
    Mentioned
    672 Post(s)
    Rep Power
    105



    Yes Reputation No
    Sticky if you modified the first post you broke the images. Click here to enlarge
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, N63s, S55s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please see http://www.burgertuning.com/emissions_info.html for more information on legal requirements related to use of BMS parts.

  6. #6
    Join Date
    Jan 2013
    Location
    California
    Posts
    674
    Rep Points
    986.1
    Mentioned
    31 Post(s)
    Rep Power
    0


    Yes Reputation No
    Heard Drews car broke the E92 M3 world record for MPH with 135MPH!!

  7. #7
    Join Date
    Jan 2013
    Location
    California
    Posts
    674
    Rep Points
    986.1
    Mentioned
    31 Post(s)
    Rep Power
    0


    Yes Reputation No
    Good work Terry.

  8. #8
    Join Date
    Sep 2012
    Posts
    1,851
    Rep Points
    2,377.9
    Mentioned
    30 Post(s)
    Rep Power
    24


    Yes Reputation No
    Click here to enlarge Originally Posted by Linracing Click here to enlarge
    Heard Drews car broke the E92 M3 world record for MPH with 135MPH!!
    Yup, saw that.

    10.81 @ 135

  9. #9
    Join Date
    Jan 2013
    Location
    California
    Posts
    674
    Rep Points
    986.1
    Mentioned
    31 Post(s)
    Rep Power
    0


    Yes Reputation No
    Click here to enlarge Originally Posted by BlackJetE90OC Click here to enlarge
    Yup, saw that.

    10.81 @ 135
    Bad ass! his car is a low 10 second car easily if he can get out the whole!

  10. #10
    Join Date
    Dec 2011
    Location
    Vicenza, Italy
    Posts
    4,207
    Rep Points
    3,204.7
    Mentioned
    69 Post(s)
    Rep Power
    33


    Yes Reputation No
    Click here to enlarge Originally Posted by BlackJetE90OC Click here to enlarge
    Yup, saw that.

    10.81 @ 135
    Damn, that's moving. These N54s better step their game up. S65s are getting very impressive at the 1/4mi.
    2011 335is DCT, looking for new car friends in Italy.

  11. #11
    Join Date
    Apr 2010
    Posts
    198
    Rep Points
    127.9
    Mentioned
    2 Post(s)
    Rep Power
    2


    Yes Reputation No
    Nice runs - talk about consistent!

  12. #12
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    124,779
    Rep Points
    35,299.5
    Mentioned
    2240 Post(s)
    Rep Power
    353


    Yes Reputation No
    Promoted to the front page:

    BMS (Burger Tuning) continues its F10 M5 S63TU Stage I tuning and testing program. Last week BMS shared their Stage I Dynojet dyno results which showed upwards of 628 horsepower at the wheels. Terry Burger from BMS took the Stage I equipped M5 to the drag strip to put that horsepower to the pavement managing a best run of 11.49 @ 126.72. The car was fairly consistent but the 60 foot numbers show there is much more in it with some drag rubber.

  13. #13
    Join Date
    Jun 2011
    Posts
    314
    Rep Points
    0.4
    Mentioned
    0 Post(s)
    Rep Power
    0


    Yes Reputation No
    Click here to enlarge Originally Posted by Linracing Click here to enlarge
    Bad ass! his car is a low 10 second car easily if he can get out the whole!
    is his car a 6 speed or dct?

  14. #14
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    124,779
    Rep Points
    35,299.5
    Mentioned
    2240 Post(s)
    Rep Power
    353


    Yes Reputation No
    Click here to enlarge Originally Posted by SexiPYm3 Click here to enlarge
    is his car a 6 speed or dct?
    DCT

  15. #15
    Join Date
    Jun 2013
    Posts
    1,003
    Rep Points
    461.4
    Mentioned
    3 Post(s)
    Rep Power
    5


    Yes Reputation No
    Hmmm yeah there should be a good bit more left in it at those power levels, but vey nice work. Can't wait to see what it does with some good rubber. I'm sure launching it really is the hardest part..bone stock a lot of owners say it's hard to get a clean shot. Any idea what the DA was?

  16. #16
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    124,779
    Rep Points
    35,299.5
    Mentioned
    2240 Post(s)
    Rep Power
    353


    Yes Reputation No
    Weather has been nice and cool.

    I could go calculate it out but... someone else can do that.

  17. #17
    Join Date
    Dec 2010
    Location
    Home
    Posts
    199
    Rep Points
    0.2
    Mentioned
    7 Post(s)
    Rep Power
    0


    Yes Reputation No
    Awesome car,would love to see it with DPs,stg 2 tune

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •