Close

Results 1 to 12 of 12
  1. #1
    Join Date
    Feb 2010
    Posts
    325
    Rep Points
    467.6
    Mentioned
    8 Post(s)
    Rep Power
    5


    Yes Reputation No

    cp-e FMIC sneak peak!

    Hey Guys,
    I had the day off and took the opportunity to visit cp-e again. I have their BOV and charge pipe and asked Josh to order me another top for the TIAL bov. When I got there Josh showed me their prototype FMIC. He said they're in the process of finishing the first ten units

    Here are the shots:
    This shows the size of the core. It's MASSIVE. Additionally, there is an additional oil cooler that will mount on the top.
    Click here to enlarge

    Here's a side shot showing how the oil cooler will mount. They said they had to angle it to ensure no cutting during the install.
    Click here to enlarge

    This is how it will look from the front.
    Click here to enlarge

    here's the oil cooler by itself. it's a pretty good sized unit.
    Click here to enlarge

    The oil cooler will tie in to the factory oil cooler lines so you'll have the oil thermostat still regulating flow. The oil will travel from the engine to the factory cooler then to the cp-e cooler before returning to the engine. Given the heat issues with our motors, I'm excited for this. My name is on the first production unit coming out the door which should be next week. Josh told me that they picked up ~20 whp at 12psi on their test 135.

  2. #2
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    118,891
    Rep Points
    31,838.9
    Mentioned
    2090 Post(s)
    Rep Power
    319


    Yes Reputation No
    I'm not familiar with cp-e, would you give me some background info please?

  3. #3
    Join Date
    Feb 2010
    Posts
    1,738
    Mentioned
    63 Post(s)
    Rep Power
    0


    Yes Reputation No
    What do you want to know? I've been sponsored by them for almost 3 years on two different cars.
    Start with www.cp-e.com

  4. #4
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    118,891
    Rep Points
    31,838.9
    Mentioned
    2090 Post(s)
    Rep Power
    319


    Yes Reputation No
    Click here to enlarge Originally Posted by Laloosh Click here to enlarge
    What do you want to know? I've been sponsored by them for almost 3 years on two different cars.
    Start with www.cp-e.com
    Haha, don't make me do work, that is what you are for!

    Get the info on here, who are they, what do they do, etc.

    I know, I can check the link, and I will, but give some details.

  5. #5
    Join Date
    Feb 2010
    Posts
    1,738
    Mentioned
    63 Post(s)
    Rep Power
    0


    Yes Reputation No
    Click here to enlarge Originally Posted by Sticky Click here to enlarge
    Haha, don't make me do work, that is what you are for!

    Get the info on here, who are they, what do they do, etc.

    I know, I can check the link, and I will, but give some details.
    I will call the owner tomorrow, and have him get in touch with whoever the admin is on here. They have resume's and are a LEGIT company that makes amazing quality parts. All made in house, none of this china knock of crap. All the fab work, cad design, dyno testing, done in house.

  6. #6
    Join Date
    Feb 2010
    Location
    Miami Beach
    Posts
    1,094
    Rep Points
    513.1
    Mentioned
    10 Post(s)
    Rep Power
    6


    Yes Reputation No
    I like how it has an additional oil cooler on top
    Click here to enlarge

  7. #7
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    118,891
    Rep Points
    31,838.9
    Mentioned
    2090 Post(s)
    Rep Power
    319


    Yes Reputation No
    Click here to enlarge Originally Posted by Laloosh Click here to enlarge
    I will call the owner tomorrow, and have him get in touch with whoever the admin is on here. They have resume's and are a LEGIT company that makes amazing quality parts. All made in house, none of this china knock of crap. All the fab work, cad design, dyno testing, done in house.
    That sounds great, I'll get the intercooler sneak peak up on the front page somehow. I'm sure people would be interested in it, need some graphs though.

    Is this just for the 335?

  8. #8
    Join Date
    Feb 2010
    Posts
    1,738
    Mentioned
    63 Post(s)
    Rep Power
    0


    Yes Reputation No
    its for the 135/335, I'm not sure if it fits the 535.

  9. #9
    Join Date
    Feb 2010
    Posts
    325
    Rep Points
    467.6
    Mentioned
    8 Post(s)
    Rep Power
    5



    Yes Reputation No
    Click here to enlarge Originally Posted by Laloosh Click here to enlarge
    its for the 135/335, I'm not sure if it fits the 535.
    If we weren't going to have feet of snow today I'd be installing it this weekend.

    I'll get it on next week and do a writeup with pix.

  10. #10
    Join Date
    Feb 2010
    Location
    Beltsville, MD
    Posts
    238
    Rep Points
    285.1
    Mentioned
    7 Post(s)
    Rep Power
    3


    Yes Reputation No
    GREAT POST!

    Boom - thank you so much for the review.

    Currently the FMIC is installed on my e92. It truely transforms what the car feels like when you get the urge to plant your foot on the pedal. As Boom stated we are expecting a really bad storm today and my scheduled dyno runs and install pictures are being rescheduled.

    We have contacted the admins of this forum via PM (I hope I sent it to the right people Click here to enlarge) and are looking forward to being a vendor here. If anyone ever has any questions you can reach me via PM or the following emails:

    support@cp-e.com OR jhershorin@cp-e.com

    I will be posting up a full introduction to our company and what we do. In short - we are an American manufacturing company that prides ourselves on the fact we make everything in house. CAD driven CNC stations, robotic mig welders, CAD driven mandrel benders, FARO arms for 3d digitization, 3d printers, mig and tig welding stations, and full in house design and manufacturing of our fully customizable (30x30 cell maps) n54 tuning solution Standback2 w/ PNP available from www.AMS.com

  11. #11
    Join Date
    Feb 2010
    Location
    S.A
    Posts
    29
    Rep Points
    16.9
    Mentioned
    0 Post(s)
    Rep Power
    0


    Yes Reputation No
    Top Class! Cant wait to see more

  12. #12
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    118,891
    Rep Points
    31,838.9
    Mentioned
    2090 Post(s)
    Rep Power
    319


    Yes Reputation No
    Click here to enlarge Originally Posted by DiVinci Click here to enlarge
    Top Class! Cant wait to see more
    Me either! CP-E contacted, their forum is up, along with banner and logo, they will officially have supporting vendor status momentarily.

    Can't wait to get the info up on all the products!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •