Close

Page 1 of 2 12 LastLast
Results 1 to 25 of 42
  1. #1
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25


    Yes Reputation No

    Forced Performance HTA3586r

    So I received an FP HTA3586r when I bought my new evo. The previous owner never installed it on the car. He bought it used wtih 1000 miles on it so it's almost brand new. I want to go a different route so I'm selling it. $1800 shipped. Info on it is below.


    Click here to enlargeClick here to enlargeClick here to enlargeClick here to enlargeClick here to enlargeClick here to enlargeFP HTA 3586R Ball Bearing Turbocharger $2199
    Click here to enlarge

    The FP HTA™ GT3586R turbocharger is based on the world renowned Garrett GT Ball Bearing structure. This fact assures the highest strength and longest service life possible. At Forced Performance, we have long recognized the precision and excellence in manufacturing found in the full line of Garrett Ball bearing cartridges and turbochargers, and this is exactly why we choose Garrett over others manufacturers when we build our custom application HTA™ units. This 62mm inlet / 86mm exducer HTA™ wheel extends mass flow well beyond 75 lb/min with observed power output in the 730+whp range on well prepared cars. This turbo is available with a variety of turbine housings, but using anything smaller than a .82 is stupid.
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  2. #2
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Bump for a 750hp turbo Click here to enlarge
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  3. #3
    Join Date
    Aug 2010
    Location
    Bay Area
    Posts
    977
    Rep Points
    779.1
    Mentioned
    5 Post(s)
    Rep Power
    8


    Yes Reputation No
    any vids? shaft play etc?

  4. #4
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    0 shaft play. What kind of vid do you want? It was only put on a car for test fitting a mani for a build 2 owners ago. I can vid me attempting to move the shaft if that's what your looking for?
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  5. #5
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    119,485
    Rep Points
    32,174.5
    Mentioned
    2112 Post(s)
    Rep Power
    322


    Yes Reputation No
    Good luck with your sale.

  6. #6
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Thanks sticky. Bump!
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  7. #7
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Bump for great turbo!
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  8. #8
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Bump
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  9. #9
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    TTT people. I want something smaller.
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  10. #10
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    8,040
    Rep Points
    5,733.7
    Mentioned
    179 Post(s)
    Rep Power
    58


    Yes Reputation No
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

  11. #11
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    LOL, i've definately considered that kit. It's a little pricey and I just bought a new tranny and upgraded TC. I'm going to sell the HTA86r and stick with my GT35r for now. I'm probably going to send in the GT35r for a billet upgrade. I found out yesterday it's a DBB turbo so I'm pretty happy about that.


    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  12. #12
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    8,040
    Rep Points
    5,733.7
    Mentioned
    179 Post(s)
    Rep Power
    58


    Yes Reputation No
    Click here to enlarge Originally Posted by bigdnno98 Click here to enlarge
    LOL, i've definately considered that kit. It's a little pricey and I just bought a new tranny and upgraded TC. I'm going to sell the HTA86r and stick with my GT35r for now. I'm probably going to send in the GT35r for a billet upgrade. I found out yesterday it's a DBB turbo so I'm pretty happy about that.
    ahh, JEALOUS.
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

  13. #13
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    you should get this HTA86r, I'll give you a hell of a deal on it Click here to enlarge

    Click here to enlarge Originally Posted by fastgti69 Click here to enlarge
    ahh, JEALOUS.
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  14. #14
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    8,040
    Rep Points
    5,733.7
    Mentioned
    179 Post(s)
    Rep Power
    58


    Yes Reputation No
    Click here to enlarge Originally Posted by bigdnno98 Click here to enlarge
    you should get this HTA86r, I'll give you a hell of a deal on it Click here to enlarge
    I would consider it if I had my motor build and my I had a turbo kit to fit that LOL. My EFR on my car has a custom exhaust manifold so it's a stock location bolt on.
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

  15. #15
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Ah, I see. I kind of wish this one had come with a stock frame turbo. An FP Black would be awesome and still be kind of subdued, sleeper look. This big ram horn mani I have with 4" intake is not too stealthy LOL.

    Click here to enlarge Originally Posted by fastgti69 Click here to enlarge
    I would consider it if I had my motor build and my I had a turbo kit to fit that LOL. My EFR on my car has a custom exhaust manifold so it's a stock location bolt on.
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  16. #16
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Click here to enlarge
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  17. #17
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    8,040
    Rep Points
    5,733.7
    Mentioned
    179 Post(s)
    Rep Power
    58


    Yes Reputation No
    Click here to enlarge Originally Posted by bigdnno98 Click here to enlarge
    Ah, I see. I kind of wish this one had come with a stock frame turbo. An FP Black would be awesome and still be kind of subdued, sleeper look. This big ram horn mani I have with 4" intake is not too stealthy LOL.
    It's a huge turbo! Hard to make that look stock! exp with the 4" intake. God, I gotta get me an EVO. So many, I mean so god damn many different kits. AHH
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

  18. #18
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    I love this car. I miss my low end torque from my 335i sometimes but I keep saying once I get the e85 tune and the parts I bought put on it'll be worth it. If I can't make a 10 sec 1/4mi pass in this car I need to quit drag racing LOL!
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  19. #19
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    8,040
    Rep Points
    5,733.7
    Mentioned
    179 Post(s)
    Rep Power
    58


    Yes Reputation No
    Click here to enlarge Originally Posted by bigdnno98 Click here to enlarge
    I love this car. I miss my low end torque from my 335i sometimes but I keep saying once I get the e85 tune and the parts I bought put on it'll be worth it. If I can't make a 10 sec 1/4mi pass in this car I need to quit drag racing LOL!
    Psh, 10 sec will be piece of cake.
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

  20. #20
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Bump
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  21. #21
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Price drop. $1700 shipped
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  22. #22
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    Bump!!!!!!
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  23. #23
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    bump
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


  24. #24
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    8,040
    Rep Points
    5,733.7
    Mentioned
    179 Post(s)
    Rep Power
    58


    1 out of 1 members liked this post. Yes Reputation No
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

  25. #25
    Join Date
    Dec 2011
    Location
    Clarksville, TN
    Posts
    3,909
    Rep Points
    2,484.2
    Mentioned
    44 Post(s)
    Rep Power
    25



    Yes Reputation No
    He hasn't came back online about it yet. It's ready to ship now. Not sure when UPS is open/closed because of the holidays but I could have it out wed for sure Click here to enlarge
    2011 335is DCT, JB4 + MHD BEF, stage 2 LPFP, e50 + 50/50 meth, FBO, MT ET Streets when needed


Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •