06-30-2013, 02:57 PM
I dont think the IC is big enough....
06-30-2013, 03:00 PM
Wow. I can't imagine what the gains would be like. I'd assume that there's no need for such a big IC, but the oil cooler is probably very useful.
06-30-2013, 05:54 PM
probably no need, except for those planning on going completely crazy power and don't want any FMIC related issues... be good to know specs on the core - pressure drop etc.
Originally Posted by Karura
the only thing i'd worry about is the coolant temps suffering
this would NOT be a smart thing to do on a 6AT unless you've gone the dedicated trans cooler as well already, as water temps would have to suffer slightly?
if the oil cooler wasn't so massive, it would almost be a worry behind the FMIC too.... but then you DO still have the opportunity to go for 3 oil coolers if you're actually crazy.
sorry sticky, i promise not to be so lazy next time
Originally Posted by Sticky
ya, there's a good few mm more they could extend it.. hahhaah
Originally Posted by bmw335iguy
18% more surface area~ than the big tom (it's not as wide, 15.74" vs 18" but it's a bunch taller... 15.74" vs 12")
it looks like it wouldn't have too much trouble going SLIGHTLY wider (to the same width as the big tom @ 18"), if you were that breed of crazy, too, for an absolute no-way to go bigger ... which would put it at 31% more surface area
Tags for this Thread