View Poll Results: Should I take the AC and heater core out?
- 6. You may not vote on this poll
Thread: Just purchased a 1995 M3
09-27-2013, 08:24 PM #526
Took a 3 hour study break tonight and got a whole lot done. I'm hoping to go back tomorrow and finally finish it up. There is nothing difficult left, so it shouldn't take more than a few hours.
Connecting the driveshaft and fixing the shifter that was incorrectly installed... lol
OBD1 coolant adaptor pipe
Finished installing the new AKG 75D mounts.
Getting the cooling system back together
Decided to purchase an oil cooler since I don't feel like taking it all back apart to put one on later.
I went with the C&R oil cooler from bimmerworld, euro oil filter housing, euro oil filter housing banjo bolt, AN line adaptor, and Russell 10 AN lines and hardware. I considered going with the VAC kit or piecing one together on my own, since it would be much cheaper, but I absolutely hate the idea of putting an oil cooler in front of the radiator. I know a lot of track guys do it, and sure its better than no oil cooler, but its a terrible location to place it. Also, the C&R oil cooler is aluminum, which is much better than the commonly used brass exchangers.
Alternator and PS motor removed
Stock housing removed
Euro housing installed
Mounted the gauges and left a spot for AFR
AN adaptor installed
New banjo bolt
All back together
09-29-2013, 09:33 AM #527
10-05-2013, 08:26 PM #528
Oil cooler install is complete. Wiring harness and intake manifold going on tomorrow.
Oil cooler in place
The bimmerworld guys are jokesters A very impressive piece of artwork.
My buddy helped me make the AN lines
Everything back together
10-06-2013, 02:03 AM #529
She looks awesome!
EURO 04 M3 Current Mods:GC DAs, Eibach Sways, PF RTAB's, RE RCAs, INTRAVEE II, Black Roundels, ///MFEST Badges, Depo's, Screen protector for NAV display, VCSL Bumper + Race Lip & CF Trunk & CF Rear Diffusor, DIETZ TV in Motion, SS= V1 Headers + catless pipes + X-Pipe + SS Sport Exhaust, Z8 Starter Button, Lamin-X, OEM CSL interior, OEM CSL Steering, OEM CSL Intake, OEM CSL Roof, MSS54HP + OEM CSL Tune, BBS CH's, LIGHTWERKZ, 355mm ST40 BBK, BW Oil Cooler....
10-06-2013, 09:23 AM #530
10-18-2013, 08:51 AM #531
Wiring up the gauges
Ran the wires straight to my dash panel
Manifold installed, getting ready to connect the wiring harness
Replacing the coolant, oil, etc.
Installing all of the trim
And she started! All thats left is to install the hood and then off to the dyno next Friday!
10-18-2013, 10:04 AM #532Member
- Join Date
- Apr 2011
- Jersey City
- Rep Points
- 74 Post(s)
- Rep Power
I love this thread....all the pictures and step by step install dialog is great. I just wish i was as mechanically inclined.
ESS 6XX kit
10-18-2013, 06:59 PM #533
Congrats man! Epic build.2010 e92 M3 Jet Black | DCT | ESS Tuned | Akrapovic Slip-on | Challenge X-pipe | AFE Intake | 18" Volk TE37SL | KW V3 Coilovers | RPI Scoops | Under Drive Pulley
2007 e92 Mont. Blue 335i | 6MT | COBB Tuned | Quaife 3.46 LSD | Helix FMIC | AA DPs | HKS Exhaust | DCI | Stett CP w/ Forged DVs | KWv2 Coilovers | UUC Sway Bars & SSK | HPF Stg 2 Clutch | HFS-4 | M3 Suspension Bits | DEFIVfab Diff Lockdown Kit | Stoptech Trophy BBK
10-18-2013, 09:05 PM #534
10-23-2013, 01:58 AM #535
Great thread, good work documenting it all as you go.
10-24-2013, 09:28 AM #536
11-04-2013, 04:52 PM #537
Finished up the car and got the hood on.
Took it out to make sure everything checked out
Put it on the trailer to get an exhaust bung welded in
New AEM AFR gauge installed
Getting fueled up and ready to head out to the track
In order from left to right:
Bakeme521, Myself, Onurleft, and Bakeme521's daily driver
Chasing down a 996 GT3
The car did very well and I set a new personal best lap time (1:58.7), which was a consistent time as well.
11-04-2013, 05:21 PM #538
11-04-2013, 06:41 PM #539
It's coming along very nicely man and you're really using it as intended. Props.Chrome Space Bar Issue: http://www.boostaddict.com/showthrea...338#post738338
06-30-2014, 11:24 AM #540
Thanks to Jeremy5000 and Bimmerzone, my MCS double adjustable coilovers, Hyperco 2.25" springs, Ground Control rear shock mounts, Ground Control rear articulating spring perches, Ground Control bumpsteer tie rods, and reinforcement plates finally came in! 2014 is going to be a great year with big things to come. I already have more on the way. I plan on competing in TTB this year, and I'm about to have the car right where I want it.
If anyone needs any type of part, I would definitely recommend bimmerzone as they were very easy to work with, have the best pricing hands down, and got everything to me in a timely manner.
All the parts laid out
Ground Control coilovers removed.
Ground Control race camber plates cleaned up
Motion Control coilover installed
Drivers side complete
Finished up the install! Just waiting on a few more bits and then I'm going to have it corner balanced, aligned, and ready to drive!
Stock suspension removed
Ground Control rear articulating spring perch installed.
Dad adjusting rear ride height.
How it sits now. The ride height will be changed during corner balancing.
Had the car aligned, corner balanced, and tires put on. Also installed my new Brooks Motorsports wing.
Waxed the trunk before install
Making sure everything is straight
Received and installed a racetech 4119 seat last weekend! I had planned on taking it to the track right after, but I had a gas leak. I am ordering dual fuel pumps and replacing the sender seals.
06-30-2014, 11:27 AM #541
I see you stopped playing with your girlfriend long enough to post an updateChrome Space Bar Issue: http://www.boostaddict.com/showthrea...338#post738338