Close

Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2010
    Location
    Stockholm
    Posts
    1,527
    Rep Points
    1,177.7
    Mentioned
    61 Post(s)
    Rep Power
    12


    1 out of 1 members liked this post. Yes Reputation No

    COBB Stage 2plus aggressive logs

    some logs i took this weekend. Lots of TPS action because probably of poor traction (cold / winter tyres)
    timing correction changes constantly , sometimes none, sometimes 1 cylinder and sometimes 2. Car runs very well but i can feel more power off meth (with meth AFR goes down to 11-11.5 and fuel mode 6 is triggered). Not spraying much, about 600 ml/min. No codes at all.
    Click here to enlargeClick here to enlargeClick here to enlargeClick here to enlargeClick here to enlarge
    07 335i AT - MOTIV 750 - MHD BMS E85 - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
    Click here to enlarge

  2. #2
    Join Date
    Mar 2010
    Location
    www.bootmod3.com
    Posts
    6,693
    Rep Points
    3,352.2
    Mentioned
    227 Post(s)
    Rep Power
    34


    Yes Reputation No
    TP closures will subside as you do a few runs ..it's also evident in these logs, initially there was more and then by the last log they're next to none..

    Overall looks good to me, no flatlining, no misfires...600ml should be plenty in winter conditions ..
    Click here to enlarge

  3. #3
    Join Date
    Nov 2010
    Posts
    937
    Rep Points
    562.7
    Mentioned
    52 Post(s)
    Rep Power
    6


    Yes Reputation No
    Enrita, are you going to try Procede with Cobb? I think this would be a good compo. And I don't think you need Vishnu help... it could be done now. I can make some initial map suggestions for you if you're interested.

  4. #4
    Join Date
    Mar 2010
    Location
    www.bootmod3.com
    Posts
    6,693
    Rep Points
    3,352.2
    Mentioned
    227 Post(s)
    Rep Power
    34


    Yes Reputation No
    i just wish cobb had a nice/fast graphing tool...i don't like that web based one as it doesn't allow to set scaling properly at all and makes looking at things time consuming
    Click here to enlarge

  5. #5
    Join Date
    Mar 2010
    Location
    Stockholm
    Posts
    1,527
    Rep Points
    1,177.7
    Mentioned
    61 Post(s)
    Rep Power
    12



    Yes Reputation No
    Click here to enlarge Originally Posted by JoshBoody Click here to enlarge
    Enrita, are you going to try Procede with Cobb? I think this would be a good compo. And I don't think you need Vishnu help... it could be done now. I can make some initial map suggestions for you if you're interested.
    no , dont think actually it can be done, map 0 is not full pass through as jb4 for example. I have asked Vishnu but they are reluctant in doing such a version. There are other options...
    07 335i AT - MOTIV 750 - MHD BMS E85 - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
    Click here to enlarge

  6. #6
    Join Date
    Apr 2010
    Location
    NYC
    Posts
    3,089
    Rep Points
    999.1
    Mentioned
    104 Post(s)
    Rep Power
    10


    Yes Reputation No
    Click here to enlarge Originally Posted by dzenno Click here to enlarge
    i just wish cobb had a nice/fast graphing tool...i don't like that web based one as it doesn't allow to set scaling properly at all and makes looking at things time consuming
    The OpenOffice charting tool is fast and excellent. I can get something charted in about 2 minutes tops. I prefer it for that purpose over Excel.

  7. #7
    Join Date
    Mar 2010
    Location
    Stockholm
    Posts
    1,527
    Rep Points
    1,177.7
    Mentioned
    61 Post(s)
    Rep Power
    12



    Yes Reputation No
    Click here to enlarge Originally Posted by themyst Click here to enlarge
    The OpenOffice charting tool is fast and excellent. I can get something charted in about 2 minutes tops. I prefer it for that purpose over Excel.
    do you have an openoffice template done that you can share? Basically just copy and paste over the new data to graph?
    07 335i AT - MOTIV 750 - MHD BMS E85 - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
    Click here to enlarge

  8. #8
    Join Date
    Nov 2010
    Posts
    937
    Rep Points
    562.7
    Mentioned
    52 Post(s)
    Rep Power
    6


    Yes Reputation No
    Click here to enlarge Originally Posted by enrita Click here to enlarge
    no , dont think actually it can be done, map 0 is not full pass through as jb4 for example. I have asked Vishnu but they are reluctant in doing such a version. There are other options...
    You don't need pass through... just zero out OL table and put AFR to 50, so Cobb fueling. You can 0 ignition for map1 and add advance for map2 (meth). You will not be able to use Cobb boost, but his is ok... procede has great boost control.

    It won't be a huge difference based on the Cobb public maps, but if you can get DZ's race maps for increase ignition then it could be very powerful on meth and conservative off meth.

    I think it would be a great combo... of course I would start very conservative at first and see how everything is meshing. Supposedly you can use stock procede with some minor map finetuning in the 1M, IS, etc... so dumby signal should be mirroring the different tuning just fine.

  9. #9
    Join Date
    Apr 2010
    Location
    NYC
    Posts
    3,089
    Rep Points
    999.1
    Mentioned
    104 Post(s)
    Rep Power
    10


    Yes Reputation No
    Click here to enlarge Originally Posted by enrita Click here to enlarge
    do you have an openoffice template done that you can share? Basically just copy and paste over the new data to graph?
    You would just open the CSV in OO, Insert > Chart > Chart Type > Line > Finish.

    Then you can click on the various lines to delete the unnecessary ones, right click the axis to scale as needed.

    I wish I could scale the bottom to RPM instead of time so I can get more data, but I'm not that well-versed in all of this....

  10. #10
    Join Date
    Aug 2010
    Location
    Chicago Burbs
    Posts
    1,814
    Rep Points
    1,066.8
    Mentioned
    21 Post(s)
    Rep Power
    11


    Yes Reputation No
    Meh, excel takes bout 2 mIns to graph as well with practice.

  11. #11
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    120,331
    Rep Points
    32,755.8
    Mentioned
    2133 Post(s)
    Rep Power
    328


    Yes Reputation No
    Thanks for the logs Enrita.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •