Type: Posts; User: BMW4ever
Search: Search took 0.00 seconds.
04-27-2014, 07:20 AM
I think yes seems like only clutch disc slips. I don't know may be somebody can help me with right choice from Sachs for my UUC "B13" marked flywheel?
04-27-2014, 07:13 AM
Was too busy did big work and go from ~360 hp and ~460Nm on 0.7 bar to something f*cking funny on 1.3 bar - after some time UUC kevlar clutch can't handle it and slips now :(((
I don't know what to...
02-11-2014, 09:36 AM
Got Simons mufflers on Saturday evening and tonight we finished new turbo exhaust SS304 with full 3". Was tired so only 2 pics of TIG welding:
01-12-2014, 04:18 PM
Synchronic BOV works on low boost no surge anymore!
01-12-2014, 04:07 PM
EWG welded to downpipe because it was to loudly for everyday use.
Installed Synchronic BOV - works awesome!
01-12-2014, 04:03 PM
thanks! you can use scheme from http://www.e46turbo330ci.com/ for Unichip.
12-26-2013, 03:44 AM
M54: Thank you!
12-26-2013, 03:43 AM
Thanks! Full boost is about 4k RPM. After long tuning like drive stock ECU. It was hard to do but finally I have no CEL and Limp mode. My 720cc injectors are not the best quality but idle is pretty...
12-25-2013, 05:00 PM
Hello guys! Greetings from Belarus.
This is turbo build of my 2004 BMW E60 525i with M54B25 in stock. Engine rebuilt in M54B28:
- forged M52B28 crank
- M52B28 pistons and rods
- Cometic MLS...
09-07-2013, 04:55 AM
Can you give me your model project file? Want to make my own intake SS 304 manifold.
09-07-2013, 04:47 AM
He-he, I tried to dissamble PPC at my MS45.0 and make decision to go with Parallel ECU configuration - more easier. Because of my turbo build I need to rewrite code from two banks 1-3 and 4-6 for...
10-12-2012, 09:12 AM
No... Just ordered Raceware head studs. Next will be Cometic .120" MLS head gasket and Turbosmarts 38mm external wastegate. SPA Turbo manifold the way to go.
It will be M54B28TU :awesome:
10-12-2012, 03:12 AM
I measure block height - 210.7 M52 and M54 211 mm:)
Can you give me correct measurements? Thanks!
10-11-2012, 05:26 PM
I decided to go with .120" Cometic MLS. My CR will be ~8.5:music-rockout:
10-10-2012, 04:14 AM
I'm thinking about M54 block with M52B28 internals to go. I will have ideal cubic engine with 84mm piston stroke = 84mm cylinder hole.
Some calculations, M52 and M54 block height are 211mm:
09-13-2012, 03:10 PM
400 whp must be ok... ecu tuning by myself...
09-12-2012, 02:52 AM
May somebody know how much power (and boost) can handle M54B25 with stock internals and VAC steel head gasket for 8.5 CR + raceware studs?
Also I'm thinking about B30 crankshaft, rods...