Search:

I will eventually. I am still learning to drive it competitively.

Car is now making just under 300 rwhp. Weighs around 1080kg. Spent some time on the track last week and it is a case of I need to learn to drive it again. Since removing close to 90 kg and adding...

Thats not the kit. Thats from Eurostop USA. Horrible stuff.

Not sure if these can be used on non M3's.

Hasnt arrived yet.

Manu in Germany.

Fronts are an inch higher and an inch wider. Will allow an 17 or 18" slick around 245 wide front and a 265/275 rear.

Also stripping more weight from it trying to get it down...

More...

17543
17544
17545

Been a while. Car has changed a bit and is no longer street driven. Caged, and stripped bare (well most of it) and will be stripped further now it is off the street. Have done a couple of track days...

You've read the thread now see the movie.......


http://www.youtube.com/watch?v=lEqMB4sG4FM&feature=player_embedded

You may remember the little battle we had with Wayne Basanko and Powerchip. 1 nil to performance forums. Now we have saved the earth from the worlds worst car.

CLIFFS:

Some fool advertsies Ford...

This is my next project.

http://www.performanceforums.com/forums/showpost.php?p=840942739&postcount=1301

No the banjo bolt blew off the back of the wastegate so this prevented the Autronic controlling the boost level. It had a 9psi spring in the wastegate so thats what it opened at. It was too hot to...

Wasnt worth taking it up any more as it wouldn't boost higher anyway. Will Rev to 8000rpm when re-tuned.

Matt Spry (P.I.T.S) did the tuning.

Sorry. 265rwhp. Been a while since I had it done.

The wastegate banjo bolt blew off on the first run so it could only boost to 9psi which was the spring rate in the watsegate. The autronic now...

4.21pm Friday 9/5/08
the phone rings.
"Hello"
"Dave, Your M3 is finished and the engineer has just attached the approved mod plate"
"WTF, woooooooohooooooooooo"
Car is being wired up this week...

Thanks lads. Here is a bit of a story I did on another forum regarding the build. More pics from a photoshoot I did with the car at http://www.qsm.com.au/show_wallpaper.php?id=66

I have...

My little bundle of s14.

2.5 Litre S14 Blue Printed Motor
2.5 Litre 87mm Crank
95mm JE Custom made ceramic coated forged alloy pistons. 8.1:1 CR
Pure Performance Factory - Verdi 'H' profile...