Type: Posts; User: franzzz
Search: Search took 0.00 seconds.
Great time !
The problem is not related to my pc
If i try ANY bimmerboost file in the download section (for the ije0s ecu) these are uploaded correctly on my car (only error 2A18 is present in the ecu...
The laptop has always worked at least until yesterday
Yesterday is anythings with old valid bin file and new .
0x06 still present after standard or full write
(fortunately I WinKFP)
Car : European 335i E91 08/2008
I used bb flash and bavarian cable in order to backup the ecu
Done after 1 hour
File patched with fuel table
Write the file and after 18 min...
After my recovery the only way is to use WINKFP.
Also the original bin file is impossible to reflash
This is the end message of the log :
"FlashModel.Flash ECU Programming state = 0x05 Bad file, ECU will need to be written with known good file twice"
Same problem and error tomorrow
This is my steps :
1)Made a full backup of my MSD80
2)edit file bin with TunerPRO (only vanos table)
3)validate the file and flash the ecu
09-19-2013, 07:58 AM
No problem i can wait.
meanwhile i try to edit my bin file with the elp of Enrita in order to adjust timing, fueling etc
09-19-2013, 07:49 AM
I need only the procedeflash file
09-19-2013, 07:33 AM
I live in Italy
It's impossible to send my ecu in USA for reflash
I ask Shiv in order to edit my original.bin (I pay no problems what he wants as long 'honest) but nothing.....
09-16-2013, 10:45 AM
Sorry the bmw pump gas bin file are taken from your forum on 11-9-2013
09-16-2013, 10:33 AM
sorry i forgot another info :
If i run only the BMS pump gas map the car run fine but sometime the SES light flash 2 or 3 time (i not remember exactly)
no errors found in ecu : only a SES flas...
09-16-2013, 10:29 AM
The situation is Stock map + Procede Rev3 and aggressive maps 9-10
If i put the BMW pump gas flash map the procede does not control the boost and the car run always on 18 psi
09-16-2013, 06:14 AM
This is my configuration on 335i Stage 2
When i run in 5th or 6th gear on 100km/h and put down the accelerator sometime the car trigger the code 29F2 (i need to restart the engine)
This is my hardware
09-10-2013, 04:43 PM
Sorry i see the Shiv Video....
Put 50 in all data and put 30 in OL fueling...
09-10-2013, 10:25 AM
in order to turn down the a/F offset i neet the procede user interface and put "0" in all data on the table "afr target offset" ?
tnx in advance
It's a PC Issue.
Changed laptop with a Dell Core I5 vpro and solid state hard Disk and Win Sevend
58 minutes for all !
very fast led blink green-red on BT cable !!!!
On my bimmerflash dashboard voltage is always 12.322v
My car is 01/2007 and pc are a Intel core 2 duo
On "step 3" after 70/80 minutes the "final countdown" still on 350 minutes and increases.
any idea ?
08-28-2013, 08:15 AM
This maps run in parallel whith Procede rev 3 ?
08-28-2013, 04:30 AM
One info :
this file is valid also for 12/06 AT transmission ?
08-24-2013, 06:17 AM
Work great on my E92 335i and BT cable
73 minutes in order to grab the ecu file
tomorrow i try the 7606262 files
Is for 335is ?
Any idea of differences ?
Another news :
My hardware 7566894 is compatible with :
Results 1 to 25 of 33