Type: Posts; User: Snertz
Search: Search took 0.01 seconds.
Pretty straight forward, I followed the instructions in the first post, took maybe 30min to put in. Only difference was I soldered the wires in instead of using positaps or twisting them together.
Yep, I have one with flash only tune via Cobb, it works well.
If anything the 044 might be a limitation, at 5 bar fuel pressure the Walbro outflows the Bosch by a bit.
I wouldn't bother with an 044 unless you could get them extremely cheap.
06-28-2016, 04:17 PM
Here are some pics of the internals, note these aren't my pics, just from the web.
Try here : http://www.bmw-planet.net/diagrams/release/us/e90/index.htm
The website is a little wonky though, might have to try loading in different browsers to get it to work.
05-13-2016, 03:28 PM
Tons on ebay, just search carbon exhaust tip
Not possible, Cobb uses a proprietary file format.
03-04-2016, 12:01 AM
This design reprinted? :dance2:
Per their post on another forum, current setup:
TPG Spec Rods
TPG Spec Pistons
TPG Ported Cylinder Head
TPG Crank Hub Kit
TPG DSS Axles
TPG Race Exhaust
TPG Single Tubo Kit
TPG Front Mount...
See that, hes got enough Nos in there to blow himself up, period!
02-02-2016, 02:50 PM
DCI is filters plus a small coupler tube, which replaces the stock airbox. Aftermarket inlets replace the hard plastic tubes that wrap around the engine from the airbox to the turbos. DCI install is...
02-02-2016, 01:35 PM
Hm need some clarification on what you're feeling at part throttle, does it feel like it's pulsating or is it like a slingshot feeling when you get on the gas? Which map are you running, the linear...
02-02-2016, 11:57 AM
Looks like the WGDC base is too high, need to dial that down to avoid the boost overshoots. On your surge log you can see that from the WGDC base vs WGDC after PID, and req boost vs boost mean.
Specs for everything on an...
01-28-2016, 12:38 PM
That setup will be fine for performance, are you completely deleting the muffler as well? 1792 is the 2.5" resonator though, do you mean 1794?
The 1792 resonator will help with rasp but you might...
01-20-2016, 11:51 AM
lmao peasants, get outta our way!
I used one of these:
and more or less ripped the old inlet out, it's going in the trash either way.
Another thing that made it easier was remove the downpipe bracket that's bolted to...
I tried doing that but it doesn't appear the DME references the main fueling table when the gas pedal is released all the way. I get an initial pop/burble coming off the gas but afr immediately goes...
Lol my bad, here's a quick walk through, assuming NCS Expert is already setup and ready to go. If not, follow the tutorial Sered posted to get it configured.
Pulling fuse/unplugging module is self...
12-17-2015, 01:10 PM
Wow impressive stuff, thanks for the updates! Quite the beer stash you've got there :cheers: