Search:

You're also personal friends with the PRS guys, and tend to just regurgitate whatever it is you read online. I have absolutely no problem with PRS, but I'm sure you know that every shop has their...

Agreed, it's near perfect IMO!



Not yet haha.



Thanks Sticky!

Thanks all! We need this sold to get started on the next project!

One mistake in the posting: I meant to say that the only thing I did NOT do was build the motor. It was built by AA.

Hey guys, I'm selling this car for a good friend of mine. I personally built the car for him, and can vouch for all of the work done. He's selling it to purchase an e90 M3.
...

Hardware is not the issue, it's finding a tuner who is willing to work with you to get the car running once you've designed and fabricated the kit.

You can tap the feed line to the vanos feed...

I'd do what Adam said as well. It's unfortunate, but the majority of problems are always the little things. I go through a huge checklist of little issues every time I pull my car apart that can make...

It was an older option for the rotrex cars before AA released the HKS blowers. Basically it runs the C38-91 charger (as opposed to the C38-81 used on production kits), a full fuel system, and a...

Nice build! How much psi is it making at redline?

The howling and mass movement of air sound is normal. If you're getting any belt squealing, you can use the turnbuckle to adjust the blower position until it stops.

The exhaust note does seem a...

If you use a strong enough spring in the Tial you may be able to get away with it. You're probably going to want to run the -11psi spring, which I believe is about -22 inches of vacuum. With the...

Using that BOV might lead to part throttle/idle problems. The SC systems run a draw through maf design.

At idle and part throttle (basically whenever there is vacuum in the intake manifold), the...

Video does the car no justice, the driver needs a lesson or two. ;)

The car was built with a gt30r and the large a/r so that it could spool very quickly and still flow the volume necessary up top to make some nice peak numbers.

As it sits the car opens the...

Up for sale is a set of MINT RAC RG4 19" staggered wheels. They are version 2 with the more aggressive concave and skinnier face. They are the original bright silver metallic paint from RAC and have...

I think an 80mm pulley is as small as you can go on the C30, coming really close to 100,000rpm which is the limit that Rotrex rates it to. I was very slightly under that, and with the 80mm was...

I'm pretty sure the S52 rod is lighter, and I remember being told it was stronger as well...

I can't understand how that would take any longer than 30 minutes to install... much less 2 hours lol.

I also can't believe it wasn't on speed this year. I usually make the 2 hour drive over to the race but this year planned to watch it at home... that didn't happen lol.

I was expecting the 458 to...

Oh ok. I only ask because I know another Jordan who does OBD-I tuning as well, but I think he's in Jersey.

I didn't know that. I hadn't even heard of Technica until I met Chelsea a few weeks ago. Which Jordan are you referring to, is he an active poster on Bf.c?

I've been using the War chip on an M20 turbo car at work and it's been working great so far. We just swapped the turbo out (car had an eBay turbo that had horrible boost creep in 3rd gear) so once...

Sounds good man. I made 347whp on the 36lb injectors before it started to lean out up top with stock fuel pressure. AFR was around 12 flat and boost was at 14.7psi with the C38-71.

PSI is great....

Adam, do you know the weight difference between the M54b30 rod and the similar S52B32 rod?

No hidden agenda here. I didn't say any of the tunes were bad...



How do you think everyone else views tunes? OBD-I is simple enough... if you have a chip burner you can view any OBD-I tune....

Agreed. If you don't have the cash needed for the supporting mods to rev it out, 7k is the limit.