Type: Posts; User: maninblack
Search: Search took 0.00 seconds.
I think this says everything...
But i'll change the HPFP nevertheless, because the most of the work is done
and i already have a new pump.
Now i have to find a garage, which can clean the...
the valves were never cleaned. For sure, the Injectors are coded well!
I checked everything twice... Plugs, Spark Plugs ...
So, swapped injector 6 with old injector 2 (which i removed yesterday)
and coil 6 with coil 3, cleared adaptation values and made a testdrive...
The error is still the same.
The Spark Plug is...
Maybe I got it.
Today I swapped injector 1-4 with new ones, cleared adaptation values and made a test drive.
now I can reproduce an error, under hard acceleration I get "verbrennungsaussetzer,...
i'm driving around with this issue since 7 months without an error code.
maybe i should dismount the intake manifold and have a look at the intake valves, if they're coked?
next week my new...
There are no error codes stored!
The Screenshot was made with running engine at idle rpm.
INPA Version should be inpa EA-90x, i'll have a look for the menue path...
Hm maybe it's important jerking is only noticable in 4th gear or higher. Sometimes more sometimes less... Sometimes in 3th gear too...
the car has ~ 88.000 km. The Spark Plugs are new. As i changed the Spark Plugs, there was oil at the third spark plug...
Some people bet on the HPFP, but the car starts immediately after i...
the car is completely stock!
I have Interfaces and Software to read out trouble codes. But the is no code stored! And no warning lights in dash :-(
first of all: i'm from germany, and its very difficult for me to write about those complex things in english, i hope you can understand me :)
i drive an 2009 E90 335i.
My Problem is,...
Results 1 to 10 of 10