Search:

Do you have E85 in your area?

Those things work excellent. My friend bought one and he had to get a couple more things and replace some of the stuff the kit came with as the quality was just too nice to use. Actually I think he...

Group buy should happen in the next 7-10 days. Really getting the process down to build these quickly. Also, trying to have some parts machined to speed up the process even more.

Yeah, should be easy to install. Checked last night, even with the EFR's center section it should be able to fit with an HKS mushroom filter on there. They will be available with 2 38mm gates (A True...

Nope, will not look like that at all. They are the twinscroll manifolds
11538

+1 ETS 5" In stock, PM me for the best price!

But sticky, there is M50B20 M52B23... They have internal mechanical changes, but are still classed as M5X motors.[/COLOR]

S50=M50B30 S52=M52B32, it's just a glorified 3er motor, nothing special,...

Nah, just US S50

My post was sarcastic. One of these swaps happens every week somewhere I'm sure, it's a VERY common swap

Big baller! I'm going to North Dakota for my vacation :(

Mike @ N54Tuning sells them!

http://www.n54tuning.com/index.php?_a=viewProd&productId=88

Me? Yeah I was on race gas but a basemap pump gas tune so that gives you hardly any power increase, maybe like 10whp at best. I only ran it to prevent detonation on stock compression

Meh, up at this altitude, a TRM Stg2 won't spool until 4400-4600RPM.

I had a 62mm. Only like 1mm bigger than GT35R. Made full spool at 3900RPM at 6,000 ft elevation


Nope, not a Garrett. It was actually a really trick Borg Warner. The most I ever ran on the car...

I have some parts from my topmount setup forsale if you are interested for a 95 S50 :D

Trapped over 127 on 12psi

Will hook up oil gauge next time car is in the shop. As observed by other forum members using our supplemental kit, he saw a 1 psi pressure drop at idle (From 20-19). All other instances remained...

Well umm... What we are doing is highly complicated and classified. We are actually taking a 3.0L E36 M3 S50 motor, and doing some witchcraft to make it fit. It's a very touchy subject as many a...

Awesome, can't wait to see the results!

I am really excited to see what kind of power this car makes! The X5M made amazing power with these mods, and it's a very similar engine.

AFAIK, Shiv @ Vishnu is doing the tune, as that's where...

Still waiting to get some dyno numbers from these. Thanks for all of your compliments Andrew, you actually know what goes into not necessarily making these, but making them right, and fit perfect...

Am I missing something? Why haven't you boosted it yet?

Our 335 shop car is long gone. But we do have something for N54's up our sleeve!

11.739 @ 127.34 60' 2.027 (Critter) E36 M3 | 12psi base map | 245,000 mile stock motor | Corded A032R's

Went to the track again last night.


Busted out an 11.7 @ 127 with an 8,540ft D/A. (Static elevation is 5,800 ft). For example, 135's slightly modded run 14.1's up here lol and E92 M3's run 14.7...

I'll post the slip when I get a chance, can't figure out scanner at the office, but maybe at my house. But not really worth being on the wall if it aint at the top!
18psi and Full nylon slicks to...