Type: Posts; User: djpaulie
Search: Search took 0.01 seconds.
07-20-2016, 09:25 AM
I personally would not remove or replace the water pump or thermostat, this can be done in about 2-3.5 hours with the car all together depending on if you've done em before. Spending $600+ dollars on...
07-15-2016, 05:50 PM
Not a problem, if you would like your welcome to send me private message and I can give you some additional contact info in case you come across anything and need help.
07-15-2016, 03:27 PM
This is my write up on the VM kit and some things not noted in payam's install guide if you would like some additional insight. I would highly recommend doing the ADV sensors no matter what as it's...
05-02-2016, 12:09 PM
Thank you, I appreciate it. It hurts making payments on a car that just sits and rots in a parking lot lol
04-30-2016, 11:38 AM
Yessir a couple months :/
Last year at NoFlyZone my motor let go, I was running 32 PSI without blocked head ports and only a VTA PCV solution which I knew was a growing problem and probably the...
04-27-2016, 02:37 PM
I got mine and they look great. I'll let ya know how they work once I get em in the car in a couple months. Again I appreciate all your hard work on these sir.
Want to Buy: still need a set of stock turbos?
still need a set of stock turbos?
04-04-2016, 01:22 PM
Put me down for a set Chris, i'll paypal ya a little later today
I'm glad we got it sorted I have told a few people with comps of this now and all reported back positive for taking care of the issue. The oil pressure is in spec at low idle but the second you tap...
12-06-2015, 01:14 PM
I fail to see how I "came at you" with my below post that if you'll turn to page 3 you can see was quoting another fellow forum poster whom stated that this was impressive for stock snails. As I...
12-06-2015, 12:45 PM
Wow, This was very rude and uncalled for? I say they aren't stock turbos because put simply they don't come on the car stock.... and you selected and "upgrade option" which would make them an...
12-06-2015, 02:15 AM
These aren't Stock turbos they are a stock new CHRA with upgraded wheels, according to VTT's site they flow an additional 20% over stock. This is more or less a stock frame car and not a stock turbo....
This would be huge! for manuals as well. The most on my 6467 I can get is about 2 psi standing on 2 step :( At least with a manual you can dump the clutch where ever you choose in the rev range...
Great Job Dave this was impressive driving and performance!!!!!! We gotta get you back out there on the upgraded setup and really blow people away. I can't wait!!!
Errr Ma Gerd.... :drool:
Want to Buy: WTB N54 engine
Looking to purchase an N54 engine
Any post weekend results?
08-29-2015, 05:21 PM
Good info to get almost hopeful that I have a boost leak drawing power from the car because that means more powa LOL. W'll find out soon just need to construct a tester and the test should be rather...
08-29-2015, 02:20 PM
AGREED, i'm a little suspicious if the AR was wrong before on the hot side and the up top restriction because they had my RMA mixed up with another turbo and when I got the turbo back it had...
08-29-2015, 11:52 AM
Yes I have but the car has been down long enough this year. Mine isn't really consuming or burning much the oil level is still full (even if going 5 k on an oil change it will only use 1/2 a qt which...
08-29-2015, 11:07 AM
Update: Got the car back together after work last night and running still getting minor amounts of smoke wondering if it's just burning off oil in the exhaust yet. Slightly suspect that the Valve...
08-28-2015, 03:39 PM
Update: FIANLLY!!!!! My turbo arrived today after paying to have it over nighted (repair was warrantied) back to me and no longer has any shaft play and seems to look pretty good with the exception...
08-17-2015, 10:31 AM
This is fantastic work guys, really appreciate it getting looked into and anxious to see the results. HUGE thank you to all of your cumulative work! Solving this issue and accuracy will get us one...
08-04-2015, 07:19 PM
Thanks guys, I like the sound very happy with the exhaust!! appreciate all the support those were all (low boost) pulls and was on a 14.5 lb WG spring combo I am waiting on the turbo issue to get...
08-03-2015, 08:01 PM
Seeing as the car is down I wanted to post some videos I had from tuning pulls in Mexico and a short 2 step clip