Type: Posts; User: franzzz
Search: Search took 0.01 seconds.
After my recovery the only way is to use WINKFP.
Also the original bin file is impossible to reflash
This is the end message of the log :
"FlashModel.Flash ECU Programming state = 0x05 Bad file, ECU will need to be written with known good file twice"
Same problem and error tomorrow
This is my steps :
1)Made a full backup of my MSD80
2)edit file bin with TunerPRO (only vanos table)
3)validate the file and flash the ecu
09-19-2013, 08:58 AM
No problem i can wait.
meanwhile i try to edit my bin file with the elp of Enrita in order to adjust timing, fueling etc
09-19-2013, 08:49 AM
I need only the procedeflash file
09-19-2013, 08:33 AM
I live in Italy
It's impossible to send my ecu in USA for reflash
I ask Shiv in order to edit my original.bin (I pay no problems what he wants as long 'honest) but nothing.....
09-16-2013, 11:45 AM
Sorry the bmw pump gas bin file are taken from your forum on 11-9-2013
09-16-2013, 11:33 AM
sorry i forgot another info :
If i run only the BMS pump gas map the car run fine but sometime the SES light flash 2 or 3 time (i not remember exactly)
no errors found in ecu : only a SES flas...
09-16-2013, 11:29 AM
The situation is Stock map + Procede Rev3 and aggressive maps 9-10
If i put the BMW pump gas flash map the procede does not control the boost and the car run always on 18 psi
09-16-2013, 07:14 AM
This is my configuration on 335i Stage 2
When i run in 5th or 6th gear on 100km/h and put down the accelerator sometime the car trigger the code 29F2 (i need to restart the engine)
This is my hardware
09-10-2013, 05:43 PM
Sorry i see the Shiv Video....
Put 50 in all data and put 30 in OL fueling...
09-10-2013, 11:25 AM
in order to turn down the a/F offset i neet the procede user interface and put "0" in all data on the table "afr target offset" ?
tnx in advance
It's a PC Issue.
Changed laptop with a Dell Core I5 vpro and solid state hard Disk and Win Sevend
58 minutes for all !
very fast led blink green-red on BT cable !!!!
On my bimmerflash dashboard voltage is always 12.322v
My car is 01/2007 and pc are a Intel core 2 duo
On "step 3" after 70/80 minutes the "final countdown" still on 350 minutes and increases.
any idea ?
08-28-2013, 09:15 AM
This maps run in parallel whith Procede rev 3 ?
08-28-2013, 05:30 AM
One info :
this file is valid also for 12/06 AT transmission ?
08-24-2013, 07:17 AM
Work great on my E92 335i and BT cable
73 minutes in order to grab the ecu file
tomorrow i try the 7606262 files
Is for 335is ?
Any idea of differences ?
Another news :
My hardware 7566894 is compatible with :
The name of the Alpina Mechatronic is the number of the .0pa file : 7591971
For All people with this hardware it's possible to put all Alpina files
just a little video on the small road
V48.1 software for transmission
335i 306cv (stock)
Today i try to make same video with 7606260 files
For my point of view the speed is the same
Yes for me it's the only way.
I tried the 7615836.0da (file master wich contain the 7615835 data)
the flash work but the EGS module still in error.
(after the flash an error "security warning"...
Results 1 to 25 of 29