• DCT Build Part VIII - Putting it back together

      As of right now, the transmission is completed and the cooling system is in the process of being completed. Where we left off was the car being taken to SSP for the build of the cooling system. To make this all make sense we will not skip ahead, instead showing you each step. Here SSP is getting ready to put it together with the new clutch discs. They laid out all the parts and used 3d scanning equipment to record them to aid in the production of the parts. Everything was laid out to make sure the parts were clean and accounted for. Additionally, they were working on prototype viton seals for the transmission. The next update will have details on the cooling system.























      This article was originally published in forum thread: M3 DCT Build Journal - World's First BMW DCT Build started by Sticky View original post
      Comments 3052 Comments
      1. Pea's Avatar
        Pea -
        Click here to enlarge Originally Posted by benzy89 Click here to enlarge
        The building part was easy, even Drew on M3Post tried the same SSP Kevlar DCT plates in his DCT. The software reprogramming is what's preventing this from being a finished product.
        it could also be a mecanical limitation in the dct oilpump,it has a max capacity of 30 bar and it might not been enough to prevent the clutches to slip if you raise the torque to much, here are some facts
        http://www.google.cm/url?sa=t&rct=j&...2erL1uMNwn4Y7w
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by E90SoFlo Click here to enlarge
        Gotcha, so the tranny is all put back together and they are just waiting for tuning software, which nobody has..

        Get a MIT nerd working on it Click here to enlarge
        The trans should be fine, there are some other hardware changes going on as well that should be completed this month.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by img Click here to enlarge
        At least my car runs and drives just fine.On the other hand your Unicorn has been down for God knows how long now.I really lost track.
        Those YSI blowers put down great numbers but i've never seen any of them running,i heard of multiple blown motors and etc but im sure it did put down some serious numbers.
        Good Luck with your build !
        Your car runs, good for you. Unfortunately your car doesn't run fast enough for me. You enjoy it, unfortunately, it's not good enough to satisfy me.

        Oh no my car has been down, oh noes. I don't see anyone commenting on some other cars that have been down longer that aren't doing anything as complex. But it's find to only point fingers in one direction everyone knows what a fanboy you are.

        I've seen the YSI running on the S65, weird you haven't. Probably because you use a tuner not capable of creating a setup with one. Let me know if they ever do.

        I've heard of lot's of blown motors from all over myself, everyone has them some people just prefer to pretend like they have a flawless tuner. Everyone has motor failures, EVERYONE. Even the false tuning gods whose but you have permanently glued your lips to.

        Cya.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by img Click here to enlarge
        Not in anyway,you would do the same if someone is talking $#@! about your project !
        You're sitting here talking down on mine hypocrite.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by benzy89 Click here to enlarge
        I just wanna see something non-ESS competing for top spot. IF (big IF) Sticky's car is as good as advertised (low compression with YSI & quality tuning), it'll take Top S65 WHP & Top DCT WHP all in one shot. And if the DCT reprogramming actually is as good as the OEM LC, it should be fastest S65 in the 1/4 mile. But like I said, it's IF (or more when) Sticky's car hits the road cause the only thing that matters is dyno sheets & 1/4 mile slips.
        It won't even be a comparison, these kids with their baby blowers are doing things now where others were almost 3 years ago. Nothing new or interesting... and won't even be a competition.
      1. benzy89's Avatar
        benzy89 -
        Click here to enlarge Originally Posted by img Click here to enlarge
        Fair enough,I don't drag race but im sure a LC built motor running a YSI blower would be an absolute monster and i would def see it clocking great numbers on the strip !
        Shocked that you don't hit the track having the the most powerful S65 on the East Coast (not sure how it stands up against S65's globally)

        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        It won't even be a comparison, these kids with their baby blowers are doing things now where others were almost 3 years ago. Nothing new or interesting... and won't even be a competition.
        I look forward to the massacre & expect some high quality footage
      1. klipseracer's Avatar
        klipseracer -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        I have a pretty good ability at differentiating sarcasm considering how often I use it. I read a lot of posts and don't particularly pay attention to your specific tones. Regardless, I don't find a comparison to unfor funny.
        I've told you this before. So maybe i need to remind you. Chill the $#@! out. </haha>......

        EDIT: I'm really not here to troll. Just mess around with you a bit in a friendly way.
      1. klipseracer's Avatar
        klipseracer -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        It won't even be a comparison, these kids with their baby blowers are doing things now where others were almost 3 years ago. Nothing new or interesting... and won't even be a competition.
        Have you got any type of hp goal in mind?
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by klipseracer Click here to enlarge
        Have you got any type of hp goal in mind?
        Something similar to a turbo Scion.

        I'd say 7XX on pump and we'll see where I go from there.
      1. nafoo's Avatar
        nafoo -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        The trans should be fine, there are some other hardware changes going on as well that should be completed this month.
        Wheelie bar? Parachute?
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by nafoo Click here to enlarge
        Wheelie bar? Parachute?
        Gun rack.
      1. Sorena's Avatar
        Sorena -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        Gun rack.
      1. Forcefed's Avatar
        Forcefed -
        Any update? ETA?
      1. fastgti69's Avatar
        fastgti69 -
        Click here to enlarge Originally Posted by Forcefed Click here to enlarge
        Any update? ETA?
        I believe he said sometime in Jan.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by fastgti69 Click here to enlarge
        I believe he said sometime in Jan.
        Yep. I don't think I have any more patience for anything beyond that.
      1. benzy89's Avatar
        benzy89 -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        Yep. I don't think I have any more patience for anything beyond that.
        Could only imagine --- Thinking of going to TX2K13 & showing off?? Maybe built the BB awareness while you're there
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by benzy89 Click here to enlarge
        Could only imagine --- Thinking of going to TX2K13 & showing off?? Maybe built the BB awareness while you're there
        I was calculating fuel costs to tow and it would be like $1200 there and $1200 back. Plus the hotel, fees, etc.

        I mean it's possible but that's not cheap.
      1. PEI330Ci's Avatar
        PEI330Ci -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        I was calculating fuel costs to tow and it would be like $1200 there and $1200 back. Plus the hotel, fees, etc.

        I mean it's possible but that's not cheap.
        That's a normal cost to this hobby for most racers....and it gets more expensive if you have a motorhome and a stacker.

        This is exactly why it's good to check with race shops before events to share trailer space. Some shops have 3-4 spaces in their rigs...and they don't mind selling them to help cover costs. Just an idea.....
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by PEI330Ci Click here to enlarge
        This is exactly why it's good to check with race shops before events to share trailer space. Some shops have 3-4 spaces in their rigs...and they don't mind selling them to help cover costs. Just an idea.....
        This is an excellent suggestion. I'm sure a bunch of shops will be coming out from Cali.

        I will keep it in mind. The issue though is as always the car being done.
      1. fastgti69's Avatar
        fastgti69 -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        I was calculating fuel costs to tow and it would be like $1200 there and $1200 back. Plus the hotel, fees, etc.

        I mean it's possible but that's not cheap.
        Just wait till for now. Shift sector will have another airstrip in feb. I believe. Would love to see it live at the event.