Close

    • Misfires continue to be an issue for the Vishnu Procede even after the V5 update

      This video was sent to us anonymously. The reason for that is Shiv@Vishnu had seen the video and told the owner not to post it and the owner did not for fear of being punished, lack of support, etc. We happened to get this video which shows a V5 automatic misfiring even after the voluntary harness update and several times of cleared adaptations.

      Notice the boost on the fuel gauge which drops to around or below the stock boost level yet the car still misfires. Misfires were also reported at the recent Atco rental by V5 users and other Procede users on BimmerBoost have mentioned issues with misfires as well. This issue is being brought to your attention as tremendous effort has been expended to keep it quiet on other sites. Come to your own conclusion and we hope Vishnu can resolve it.




      This article was originally published in forum thread: Misfires continue to be an issue for the Vishnu Procede even after the V5 update started by Sticky View original post
      Comments 590 Comments
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by George Smooth Click here to enlarge
        Read my first sentance and put the emphasis on the word no. Like this "So you saying no Procede users use N54tech." Then add about ten question marks after that, you use to that move.
        This isn't really coherent but, uh, this would be the problem:

        Click here to enlarge Originally Posted by George Smooth Click here to enlarge
        So you saying no Procede users use N54tech
        You said that, I didn't. Why you do not get this I have no clue.
      1. Mineo77's Avatar
        Mineo77 -
        and the reason i rarely visit this thread

        Why do peeps get all crazy with the PROcede vs. BMS JB $#@!...come on. Just shut the $#@! up and use what you like and stop the pissing match. This is like a ford forum.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by Mineo77 Click here to enlarge
        and the reason i rarely visit this thread

        Why do peeps get all crazy with the PROcede vs. BMS JB $#@!...come on. Just shut the $#@! up and use what you like and stop the pissing match. This is like a ford forum.
        Don't read it?

        This isn't a Procede vs. BMS thread. This is a thread about misfires with the Procede even after the V5, harness update, and cleared adaptations.

        Too intense for some people I guess to know what is going on.
      1. JPSlick's Avatar
        JPSlick -
        I didnt read this whole thread cause its pointless to me as my Procede vehicle drives fine. However, that fact that a forum board owner decided it was an informative thread discussion, begs the question where the threads from him are of the countless blown motors from the Jb3 crowd as of lately?

        Or maybe the lack of timing control and disgusting timing curves?

        Or how late in the game BMS has been with copying the Procede?

        Or the denial of needing CAN and magically implementing it so later on?

        Or the threads on the Jb4 Harness fiasco and problems?

        I can go on forever....
      1. Mineo77's Avatar
        Mineo77 -
        not too intense, just too much misinformation and BS, like so many threads (not specific to this forum, but around)
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by GarageKeptE92 Click here to enlarge
        I didnt read this whole thread cause its pointless to me as my Procede vehicle drives fine. However, that fact that a forum board owner decided it was an informative thread discussion, begs the question where the threads from him are of the countless blown motors from the Jb3 crowd as of lately?

        Or maybe the lack of timing control and disgusting timing curves?

        Or how late in the game BMS has been with copying the Procede?

        Or the denial of needing CAN and magically implementing it so later on?

        Or the threads on the Jb4 Harness fiasco and problems?

        I can go on forever....
        What blown motors? The same rehashed motors that we already have threads on? What are you talking about?
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by Mineo77 Click here to enlarge
        not too intense, just too much misinformation and BS, like so many threads (not specific to this forum, but around)
        Give specific examples.
      1. JPSlick's Avatar
        JPSlick -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        What blown motors? The same rehashed motors that we already have threads on? What are you talking about?
        Typical answer anyone would expect, differ from my posts original point and move onto making it appear like it has no substance.

        It's interesting how a lowly misfire issue that was already resolved makes headline news for this site....


        It's simply interesting. It appeared your original intent of the post was to forewarn the community of problems.

        So where is your forewarning over other tunes issues?
      1. Laloosh's Avatar
        Laloosh -
        Great material Sticky. I got tomorrows topic ready for you.

        JB3 MT owner bogs and bends valves while destroying his intake manifold. For more information contact qmax, but wait he might deny it cause no one actually know of this....
      1. 654's Avatar
        654 -
        Vishnu is putting more effort to solve the problem now. If they manage to do it I believe many AT Procede customers are grateful for what Sticky did. Just read the other forum.. Is there still someone who would like to remove the info and video? I hope not.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by GarageKeptE92 Click here to enlarge
        Typical answer anyone would expect, differ from my posts original point and move onto making it appear like it has no substance.

        It's interesting how a lowly misfire issue that was already resolved makes headline news for this site....


        It's simply interesting. It appeared your original intent of the post was to forewarn the community of problems.

        So where is your forewarning over other tunes issues?
        You are not making any sense to me. I asked you, what blown motors that people need to be made aware of? It would seem any details are already here so what is it you are bringing up that is some stunning revelation? Nothing?

        A lowly misfire issue that was resolved? RESOLVED? So all the other people posting in the thread with misfire issues and the person who made the video switching to a different tune means it is resolved? Yep, sounds like the resolution is to get a JB4 thus far.

        If you feel there are issues with the other tune make a thread and discuss it. Show me a video where you can clearly see the issues.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by Laloosh Click here to enlarge

        JB3 MT owner bogs and bends valves while destroying his intake manifold. For more information contact qmax, but wait he might deny it cause no one actually know of this....
        You have said you wish to destroy BMS, if there is proof of this post it up but no one has seen anything.
      1. JPSlick's Avatar
        JPSlick -
        Click here to enlarge Originally Posted by Laloosh Click here to enlarge
        Great material Sticky. I got tomorrows topic ready for you.

        JB3 MT owner bogs and bends valves while destroying his intake manifold. For more information contact qmax, but wait he might deny it cause no one actually know of this....
        LOL cats out of the bag.

        Click here to enlarge Originally Posted by 654 Click here to enlarge
        Vishnu is putting more effort to solve the problem now. If they manage to do it I believe many AT Procede customers are grateful for what Sticky did. Just read the other forum.. Is there still someone who would like to remove the info and video? I hope not.
        What purpose does it have in the first place?

        If you had a misfire issue, you would know it was present without seeing the video.

        If you have a misfire there is a fix.

        No reason for the video from the get go.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by 654 Click here to enlarge
        Vishnu is putting more effort to solve the problem now. If they manage to do it I believe many AT Procede customers are grateful for what Sticky did. Just read the other forum.. Is there still someone who would like to remove the info and video? I hope not.
        Nobody seriously wants this removed except for themyst who Shiv scared somehow.

        They have no choice but to put more effort in, this issue has been around since the V3 and still isn't fixed? I hope people are grateful they can see it for themselves.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by GarageKeptE92 Click here to enlarge
        What purpose does it have in the first place?

        If you had a misfire issue, you would know it was present without seeing the video.

        If you have a misfire there is a fix.

        No reason for the video from the get go.
        The video is with the V5 with the upgraded harness and cleared adaptations which Shiv insinuates will solve the issues. Clearly even with all the newest trinkets and following exactly what he says the issue still persists. Very relevant IMO as this is as up to date as the Procede can be yet there still is a problem.
      1. JPSlick's Avatar
        JPSlick -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        You have said you wish to destroy BMS, if there is proof of this post it up but no one has seen anything.
        tx2 8:42 pm
        (8:42:25 PM): I have proof... text messages between me and qmax
        (8:42:29 PM): google voice ftw
        (8:42:40 PM): all archived in the cloud






        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        The video is with the V5 with the upgraded harness and cleared adaptations which Shiv insinuates will solve the issues. Clearly even with all the newest trinkets and following exactly what he says the issue still persists. Very relevant IMO as this is as up to date as the Procede can be yet there still is a problem.
        You do realize like most new features, including ones of your praised vendors, their are bugs?

        Again, the problem was finally found. Still dont know why it had to be headline news? I dont see any threads of your other vendors tunes when their new implementation of features has a flaw?

        Again, anyone who had the problem didnt need a video.

        Again, what is the purpose of informing something they are walking if they are already know they are moving their feet?

        Edit- Feel free to mock my "agains".
      1. alpinedevil335's Avatar
        alpinedevil335 -
        Those "bugs" have been around since V3! A little too long if you ask me.
        You would think they would have had a fix by now. This is what had to happen to finally get Vishnu to scramble and actually fix it. Who knows what else they have pushed under the rug
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by GarageKeptE92 Click here to enlarge
        tx2 8:42 pm
        (8:42:25 PM): I have proof... text messages between me and qmax
        (8:42:29 PM): google voice ftw
        (8:42:40 PM): all archived in the cloud
        Go ahead and make a thread and post it there, who is stopping you?

        Click here to enlarge Originally Posted by GarageKeptE92 Click here to enlarge
        You do realize like most new features, including ones of your praised vendors, their are bugs?

        Again, the problem was finally found. Still dont know why it had to be headline news? I dont see any threads of your other vendors tunes when their new implementation of features has a flaw?

        Again, anyone who had the problem didnt need a video.

        Again, what is the purpose of informing something they are walking if they are already know they are moving their feet?

        Edit- Feel free to mock my "agains".

        Edit 2- Keep the neg reps coming, I think its finally effecting my paycheck, I'm shaking in my boots.
        There are bugs? So... Shiv wants to just keep a small bug under wraps? Shiv tells the user to not post it... why? Because it is a small issue? I think this has been a persistent issue.

        The problem was found? According to what? What was found? What is the solution? All I see is a good amount of users in this thread complaining of misfires. I hope they fix it and I hope they have found a resolution.

        Did not need to see the video? I think if we did not have video evidence people would be claiming the V5 is fine or the hardness update fixes things or someone just forgot to clear their adaptations. If you do not need to see the video that is your decision but considering the interest this is generating and the number of views sounds like a lot of people want to see it.

        Also, I don't praise all my vendors, I praise the vendors that deserve it. No one is claiming BMS is perfect and BMS isn't even the topic here. Procede Misfires are, stick to it.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by alpinedevil335 Click here to enlarge
        Those "bugs" have been around since V3! A little too long if you ask me.
        You would think they would have had a fix by now. This is what had to happen to finally get Vishnu to scramble and actually fix it. Who knows what else they have pushed under the rug
        Exactly, and considering how many people are pissed off this video is up sounds to me like someone is trying to downplay the entire issue.
      1. LostMarine's Avatar
        LostMarine -
        Click here to enlarge Originally Posted by GarageKeptE92 Click here to enlarge
        I didnt read this whole thread cause its pointless to me as my Procede vehicle drives fine. However, that fact that a forum board owner decided it was an informative thread discussion, begs the question where the threads from him are of the countless blown motors from the Jb3 crowd as of lately? Or maybe the lack of timing control and disgusting timing curves? Or how late in the game BMS has been with copying the Procede? Or the denial of needing CAN and magically implementing it so later on? Or the threads on the Jb4 Harness fiasco and problems? I can go on forever....
        typical answer.. someone see's a problem, and then attacks opposing tune. The topic is how V5 and its updates is still misfiring just as good as v3 and v4. almost 2 yrs of the same problem and noone wants to shed light on it..

        1. everything your refering to has been posted, and not hidden, and not taken down
        2. late to the game yet still dominating and improving
        3.jb harness fiasco? how so?

        you make no sense. typical proceder, deflect and defer. taking goods notes from the Shiv I see..

        Click here to enlarge Originally Posted by Mineo77 Click here to enlarge
        and the reason i rarely visit this thread

        Why do peeps get all crazy with the PROcede vs. BMS JB $#@!...come on. Just shut the $#@! up and use what you like and stop the pissing match. This is like a ford forum.
        i dont even really understand your comment. this isnt a Vs thread, its a specific problem with a specific tune, on specific platform.