Close

    • Update on 930chas's E-shift Performance 2JZ swap into E39 M5, car has dyno'd 762 whp at 30 psi

      Justin Nenni from Tuning Concepts has been up at E-shift tuning the past couple days. Yesterday he tuned the car on 93 pump gas, and it made 585whp at 19psi. They have been working on it today with e85. Here is a video of one of the dyno runs. They are still working on it, but it just hit 762whp at 30psi on e85.

      This article was originally published in forum thread: 2jz powered M5 dyno run started by 930chas View original post
      Comments 150 Comments
      1. Sticky's Avatar
        Sticky -
        Promoted to the front page, I don't know what to say.

        That is simply sick, ridiculous, awesome, etc. Anyone who doesn't like this kind of swap certainly can't argue with the result.
      1. Sorena's Avatar
        Sorena -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        Promoted to the front page, I don't know what to say.

        That is simply sick, ridiculous, awesome, etc. Anyone who doesn't like this kind of swap certainly can't argue with the result.
        yes , really.I'm not a big fan of swaping 2JZ/RB26/LS1... into Bmw , but you can't get that kind of power with the S62
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by HeroSina Click here to enlarge
        yes , really.I'm not a big fan of swaping 2JZ/R26... into Bmw , but you can't get that kind of power with the S62
        Exactly, and for the $ spent you can't beat this with an S62. It would be interesting to see what other BMW's would be a good candidate for this swap.
      1. 930chas's Avatar
        930chas -
        Click here to enlarge Originally Posted by mazdaspeed6 Click here to enlarge
        SO $#@!ING SICK
        Thank you!

        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        Promoted to the front page, I don't know what to say.

        That is simply sick, ridiculous, awesome, etc. Anyone who doesn't like this kind of swap certainly can't argue with the result.
        Thanks, Sticky. I obviously agree with you 100%.

        Also, remember this is a stock bottom end motor. Talking with Justin yesterday he said that with this tune that motor should be good for an easy 60k miles. 750+whp stock block motor with a safe tune. LOL. Blows me away.
      1. fundahl's Avatar
        fundahl -
        Anything done to the head or valve-train?


        Great numbers! Should be quite the highway beast!
      1. 600whp S4's Avatar
        600whp S4 -
        I love this car and the set-up but it would be waaaay sicker with a euro 3.8L s38
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by 600whp S4 Click here to enlarge
        I love this car and the set-up but it would be waaaay sicker with a euro 3.8L s38
        Why though? Just because it would be in the BMW family?
      1. fundahl's Avatar
        fundahl -
        Click here to enlarge Originally Posted by 600whp S4 Click here to enlarge
        I love this car and the set-up but it would be waaaay sicker with a euro 3.8L s38
        I wouldn't say "wayyyy sicker" but the extra displacement would make things interesting. Most likely wouldn't rev as well though.
      1. 930chas's Avatar
        930chas -
        Here is a new video of the car. A few questions that might pop up from the video, yes, the water temp gauge will work, no as of right now the oil temp will not. I am hoping to come up with a solution to that. The dyno run in the video was 745whp, the 762 run wasn't captured on video. The few pulls in the video were down to about 5000-5500rpm because of traction issues. I will provide plenty many more videos when I receive the car and can also provide pictures of specific details if anyone has interest. This video has really wet my appetite and I am bouncing off the walls waiting to get this car back.

      1. 930chas's Avatar
        930chas -
        The pictures are too big to load, so here is a link: http://www.flickr.com/photos/4223298...7625443262215/
      1. gsfent's Avatar
        gsfent -
        Click here to enlarge Originally Posted by 930chas Click here to enlarge
        The pictures are too big to load, so here is a link: http://www.flickr.com/photos/4223298...7625443262215/
        Charlie: Getting "bad link" error message. Try again?Thx.Regards,Jerry
      1. 930chas's Avatar
        930chas -
        Click here to enlarge Originally Posted by gsfent Click here to enlarge
        Charlie: Getting "bad link" error message. Try again?Thx.Regards,Jerry
        Thanks, Jerry. Let's try this one. http://www.flickr.com/photos/4223298...262215/detail/
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by 930chas Click here to enlarge
        This video has really wet my appetite and I am bouncing off the walls waiting to get this car back.
        Can't tell you how badly it makes me want one. Awesome, absolutely awesome. The second video is great.
      1. 930chas's Avatar
        930chas -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        Can't tell you how badly it makes me want one. Awesome, absolutely awesome. The second video is great.
        Dooo etttttttt!!!Click here to enlarge Thanks, man! The sound it makes is just...Click here to enlarge.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by 930chas Click here to enlarge
        Dooo etttttttt!!!Click here to enlarge Thanks, man! The sound it makes is just...Click here to enlarge.
        I need to finish this one first! But trust me I think all the time of all the BMW's I could put that motor into...
      1. mazdaspeed6's Avatar
        mazdaspeed6 -
        all that is needed is Click here to enlarge
      1. 930chas's Avatar
        930chas -
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        I need to finish this one first! But trust me I think all the time of all the BMW's I could put that motor into...
        I almost forgot what you have going on with the M3. Click here to enlarge

        Click here to enlarge Originally Posted by mazdaspeed6 Click here to enlarge
        all that is needed is Click here to enlarge
        Thanks much! Can not say enough good about E-shift or Justin Nenni!!
      1. visualsinz's Avatar
        visualsinz -
        Sick car. Do you know how hard the wiring was for them to set up?
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by visualsinz Click here to enlarge
        Sick car. Do you know how hard the wiring was for them to set up?
        Contacting e-shift would be a good idea but I doubt they would share all their secrets so people can do it on their own.
      1. 930chas's Avatar
        930chas -
        The car is undergoing a few changes. Resonators because I guess I am getting old and it was too damn loud. Racelogic Traction Control because again..too old and tail out antics at high speeds aren't as enjoyable anymore. Lastly, built motor and a bigger turbo which I will update on later. Click here to enlarge