Close

    • C63 AMG's now offering challenge to boosted E92 M3's thanks to MHP - 11.1@130 1/4 mile, 6.66 60-130, 622 whp

      For a while now, boosted E90/E92 M3's have had an advantage over their rivals, namely the C63 AMG's. Recently, an MHP modified C63 belonging to BimmerBoost member Dads C63 has leveled the playing field, and then some. The C63 in question is running an MHP tune designed around a nitrous setup. The trap speed is just 1 mph short of what the fastest E92 M3 has done at the strip but the C63's now have a quicker ET. The 60-130 time is quicker than all stock motor E92 M3's, second only to the G-power Stage III M3. Check out the timeslip as well as the video below. Congratulations to MHP and Keith (Dads C63).





      Dyno:

      This article was originally published in forum thread: 622rwhp/546rwtq SAE 150 Shot MHP C63 started by MHP LLC View original post
      Comments 16 Comments
      1. Sticky's Avatar
        Sticky -
        Now that I got all the details, put this one on the front page: http://www.bimmerboost.com/content.p...0-Shot-MHP-C63

        Congrats to MHP and Dads C63.
      1. LostMarine's Avatar
        LostMarine -
        how do you know when the trans/stall is slipping in an auto?
      1. Dr_jitsu's Avatar
        Dr_jitsu -
        Hmmm, so really the easiest way to get more power out of my C63 is just a tune and spray. Interesting!
      1. 600whp S4's Avatar
        600whp S4 -
        That is a horrible 60ft for a auto car.. Get a Tire on that BEAST and set up the suspension cut a 1.5 60' and thats a mid ten sec car all dayyy
      1. MHP LLC's Avatar
        MHP LLC -
        Click here to enlarge Originally Posted by LostMarine Click here to enlarge
        how do you know when the trans/stall is slipping in an auto?


        It sounds like that Click here to enlarge
      1. MHP LLC's Avatar
        MHP LLC -
        Click here to enlarge Originally Posted by Dr_jitsu Click here to enlarge
        Hmmm, so really the easiest way to get more power out of my C63 is just a tune and spray. Interesting!
        Technically that would be correct $ per HP. However Keith's car has the following parts from us Click here to enlarge

        MHP v3 CDT

        MHP 1 7/8" SS LT Headers/ 3" Mids

        MHP 3" Catback with X-pipe

        MHP Race Ported Cylinder Heads

        MHP 180F Thermostat

        MHP Thermal Intake Gaskets

        MHP Custom Nitrous Kit and Fuel System

        Carbonio CF Airboxes/Filters



        Thanks!
      1. MHP LLC's Avatar
        MHP LLC -
        He typically cuts 1.65-1.68 N/A in good air, remember he didn't spray at all in first on that pass (that was his 4th pass ever on nitrous in this car so he's still playing with ramp rates with the prog. controller). Also we have ~14.0" rear rotors so we can't run a bias ply tire. Coming out of the hole in 90F+ air with 85% humidity N/A killed launch and as we all know the launch is 90% of the race. When this setup is all said and done (125 shot) basically meaning the progressive controller file is perfected I see 10.7-10.8s@132+, at MIR in Oct/Nov 10.6@134. Yes the car will be sprayed in first next time out with much more aggressive ramp in rate and there is plenty left on the table or rather in the bottles. Finally this is still pre-cam Click here to enlarge


        Thanks!
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by MHP LLC Click here to enlarge
        Also we have ~14.0" rear rotors so we can't run a bias ply tire.
        This is going to hold you back. MT does have a 17" slick though.
      1. DD GT3 RD's Avatar
        DD GT3 RD -
        NICE #s
      1. Dads C63's Avatar
        Dads C63 -
        Guys,
        Thanks for all the kind words. I have to give credit where credit is due. This is not a one man band or even a two man band. First and foremost my family supports all this crazyness and I am gratefull!! Thanks for all the help they have given and the support these last two years!!

        Andy at MHP has supplied all the software and hardware but there are others I couldn't have done it without. Ben works with me and is also a great friend and car nut. He helps me everytime out and drives most of the time now. I really enjoy watching the car run and I can have a better perspective of whats going on and how to improve things being outside the car. THANK YOU BEN!! Larry at Macedo Motorsports has always done my high performance after market work and his work is second to none. He has done most of the after market additions including this crazy nitrous set up. THANK YOU LARRY!! Jerry at MB Service here in Oviedo is a long term Mercedes mechanic and is the best in his field. He did the heads installation and other mercedes specific related work. THANK YOU JERRY!! These men have countless hours into this project and we all love it, at least I think so. LOL Click here to enlarge

        This has been a two year journey and its not over. Thanks guys and we'll get it figured out.

        The car has NO traction problems and will cut a better 60' is colder weather as Andy has said. Then we'll be looking at 10's for sure. The 11.11 pass was made with the 125 shot and not the larger 622HP shot. We only made one run with those pills and you can watch that on you tube at brantleyss. The tranny is slipping and its not pretty. LOL However, we'll get it done!!

        Ya'll keep racing and be safe!!
      1. DLSJ5's Avatar
        DLSJ5 -
        Keith, incredible stuff! Andy and MHP, great work! I knew you'd hit 6's!
      1. Dads C63's Avatar
        Dads C63 -
        Thanks Drew,
        Mean a lot coming from the competition. You are a great guy!! Click here to enlarge

        Whats next with your platform?? Care to share? Click here to enlarge
      1. MHP LLC's Avatar
        MHP LLC -
        Click here to enlarge Originally Posted by Dads C63 Click here to enlarge
        Guys,
        Thanks for all the kind words. I have to give credit where credit is due. This is not a one man band or even a two man band. First and foremost my family supports all this crazyness and I am gratefull!! Thanks for all the help they have given and the support these last two years!!

        Andy at MHP has supplied all the software and hardware but there are others I couldn't have done it without. Ben works with me and is also a great friend and car nut. He helps me everytime out and drives most of the time now. I really enjoy watching the car run and I can have a better perspective of whats going on and how to improve things being outside the car. THANK YOU BEN!! Larry at Macedo Motorsports has always done my high performance after market work and his work is second to none. He has done most of the after market additions including this crazy nitrous set up. THANK YOU LARRY!! Jerry at MB Service here in Oviedo is a long term Mercedes mechanic and is the best in his field. He did the heads installation and other mercedes specific related work. THANK YOU JERRY!! These men have countless hours into this project and we all love it, at least I think so. LOL Click here to enlarge

        This has been a two year journey and its not over. Thanks guys and we'll get it figured out.

        The car has NO traction problems and will cut a better 60' is colder weather as Andy has said. Then we'll be looking at 10's for sure. The 11.11 pass was made with the 125 shot and not the larger 622HP shot. We only made one run with those pills and you can watch that on you tube at brantleyss. The tranny is slipping and its not pretty. LOL However, we'll get it done!!

        Ya'll keep racing and be safe!!
        Apologies for leaving out 3 key components, Keith's family, Larry and Jerry. As Keith said none of this or what comes next would be possible without their understanding passion and skill. Thank you to all!
      1. DD GT3 RD's Avatar
        DD GT3 RD -
        i just listened to the video...that car sounds nuts!!!!! sounds like a dragster, kinda is thou Click here to enlarge
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by Dads C63 Click here to enlarge
        Whats next with your platform??
        I'm next Click here to enlarge
      1. MHP LLC's Avatar
        MHP LLC -
        Click here to enlarge Originally Posted by DD GT3 RD Click here to enlarge
        i just listened to the video...that car sounds nuts!!!!! sounds like a dragster, kinda is thou Click here to enlarge
        Hey it turns too, just not like your GT3 Click here to enlarge