Close

    • BMS Stage I F10 M5 S63TU V8 tune 1/4 mile results with race gas mix - 11.4@126.7

      BMS (Burger Tuning) continues its F10 M5 S63TU Stage I tuning and testing program. Last week BMS shared their Stage I Dynojet dyno results which showed upwards of 628 horsepower at the wheels. Terry Burger from BMS took the Stage I equipped M5 to the drag strip to put that horsepower to the pavement managing a best run of 11.49 @ 126.72. The car was fairly consistent but the 60 foot numbers show there is much more in it with some drag rubber.


      Further details from Terry @ BMS:

      Another great track day at Famoso today. Really good turn out with some quick supercharged M3s, the normal crew (Serg, Adam, Eric, etc), another tune/dp M5, and even a tune/downpipe X6M.

      I ran the new M5 today which is equipped with our Stage1 tune and a few gallons of 100 octane mixed with 91. And it was hauling ass all day. Best run was 11.49@126.72 with a weak 1.97 60'. Lots of 11.5@127 runs. Can't wait to get the ER downpipes on to see how these times improve.

      Also had the misfortune of losing to a very quick E63 AMG on his way to a 130mph trap.

      Also since I had the VBOX for one of the runs I remembered to go back and check the 0-60 times, etc, after the run. I think these were from one of the 11.5@127 runs. This car is seriously fun.




      This article was originally published in forum thread: Famoso 2/1 Results started by Terry@BMS View original post
      Comments 16 Comments
      1. bigdnno98's Avatar
        bigdnno98 -
        Very nice. I'd sure love to have one of these Click here to enlarge
      1. e92ttking's Avatar
        e92ttking -
        Click here to enlarge
      1. fastgti69's Avatar
        fastgti69 -
        @Terry@BMS Nice results!! How was Serge's car doing without meth? Is the pump doing well all by itself with the ethanol content and the RBs? Glad the pump is holding out strong this time around.
      1. Terry@BMS's Avatar
        Terry@BMS -
        Sticky if you modified the first post you broke the images. Click here to enlarge
      1. Linracing's Avatar
        Linracing -
        Heard Drews car broke the E92 M3 world record for MPH with 135MPH!!
      1. Linracing's Avatar
        Linracing -
        Good work Terry.
      1. BlackJetE90OC's Avatar
        BlackJetE90OC -
        Click here to enlarge Originally Posted by Linracing Click here to enlarge
        Heard Drews car broke the E92 M3 world record for MPH with 135MPH!!
        Yup, saw that.

        10.81 @ 135
      1. Linracing's Avatar
        Linracing -
        Click here to enlarge Originally Posted by BlackJetE90OC Click here to enlarge
        Yup, saw that.

        10.81 @ 135
        Bad ass! his car is a low 10 second car easily if he can get out the whole!
      1. bigdnno98's Avatar
        bigdnno98 -
        Click here to enlarge Originally Posted by BlackJetE90OC Click here to enlarge
        Yup, saw that.

        10.81 @ 135
        Damn, that's moving. These N54s better step their game up. S65s are getting very impressive at the 1/4mi.
      1. alextremo's Avatar
        alextremo -
        Nice runs - talk about consistent!
      1. Sticky's Avatar
        Sticky -
        Promoted to the front page:

        BMS (Burger Tuning) continues its F10 M5 S63TU Stage I tuning and testing program. Last week BMS shared their Stage I Dynojet dyno results which showed upwards of 628 horsepower at the wheels. Terry Burger from BMS took the Stage I equipped M5 to the drag strip to put that horsepower to the pavement managing a best run of 11.49 @ 126.72. The car was fairly consistent but the 60 foot numbers show there is much more in it with some drag rubber.
      1. SexiPYm3's Avatar
        SexiPYm3 -
        Click here to enlarge Originally Posted by Linracing Click here to enlarge
        Bad ass! his car is a low 10 second car easily if he can get out the whole!
        is his car a 6 speed or dct?
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by SexiPYm3 Click here to enlarge
        is his car a 6 speed or dct?
        DCT
      1. leveraged sellout's Avatar
        leveraged sellout -
        Hmmm yeah there should be a good bit more left in it at those power levels, but vey nice work. Can't wait to see what it does with some good rubber. I'm sure launching it really is the hardest part..bone stock a lot of owners say it's hard to get a clean shot. Any idea what the DA was?
      1. Sticky's Avatar
        Sticky -
        Weather has been nice and cool.

        I could go calculate it out but... someone else can do that.
      1. img's Avatar
        img -
        Awesome car,would love to see it with DPs,stg 2 tune