Close

    • Porscheboost member M3ntal runs a 10.3@136 1/4 mile with stock internal motor 996TT

      Congratulations to M3ntal on putting down a very impressive 1/4 mile run with his stock motor 996TT. You may remember this car dyno'd 717 wheel horsepower on the stock motor with E85 at 22 psi. For this run the car was running 22psi and E85 along with FP30R turbos with the tune coming from Roshan Patel. The end result is a very stout 10.3@136 1/4 mile run. The car also appears to be converted to rear wheel drive.


      Ditching the all wheel drive makes the car lighter but also allows for more horsepower to the rear wheels. Not to mention parts won't break as easily on the strip. Putting power down does not seem to be an issue as the 60 foot time was 1.671.

      Congrats again to @M3ntal , well done.


      This article was originally published in forum thread: Stock motor Porsche 996tt goes 10.36 first day out started by M3ntal View original post
      Comments 46 Comments
      1. bmw335iguy's Avatar
        bmw335iguy -
        Click here to enlarge
      1. bobS's Avatar
        bobS -
        Sick......real sick
      1. Sledgehammer's Avatar
        Sledgehammer -
        Nice 60ft I wasn't expecting that... E85 make a nice difference, I would love to run that with my build but nothing easily accessible for me. Whats the next mod, you're to close to a 9 sec ride now LOL
      1. benzy89's Avatar
        benzy89 -
        Note to Self: Get a P-Car


        When'd you make that pass? It's been snowing/cold as $#@! out recently
      1. RedBullJnky's Avatar
        RedBullJnky -
        Shweeeet!
      1. whoosh's Avatar
        whoosh -
        Quite impressive.

        Click here to enlarge
      1. Kjeronimo91's Avatar
        Kjeronimo91 -
        RWD conversion?

        turbo intercoolers and clutch
        w/ e85 looks like a nice cost effective project Click here to enlarge
      1. LostMarine's Avatar
        LostMarine -
        damn.. makes ya wonder why build anything else Click here to enlarge
      1. Sledgehammer's Avatar
        Sledgehammer -
        Click here to enlarge Originally Posted by LostMarine Click here to enlarge
        damn.. makes ya wonder why build anything else Click here to enlarge
        Here you go with the BS, buy a damn car and come on out with it already LOL
      1. LostMarine's Avatar
        LostMarine -
        Click here to enlarge Originally Posted by Sledgehammer Click here to enlarge
        Here you go with the BS, buy a damn car and come on out with it already LOL
        my diff should be done in a day or so, defiv wheelhop fix soon after that. a couple buyers on the hook for the blower.. just takes time
      1. Sorena's Avatar
        Sorena -
        You getting a 996 LM? Nice!
      1. LostMarine's Avatar
        LostMarine -
        Click here to enlarge Originally Posted by Sorena Click here to enlarge
        You getting a 996 LM? Nice!
        i never said that
      1. M3ntal's Avatar
        M3ntal -
        Click here to enlarge Originally Posted by benzy89 Click here to enlarge
        Note to Self: Get a P-Car


        When'd you make that pass? It's been snowing/cold as $#@! out recently
        Dec 15- last day atco was open

        Click here to enlarge Originally Posted by Kjeronimo91 Click here to enlarge
        RWD conversion?

        turbo intercoolers and clutch
        w/ e85 looks like a nice cost effective project Click here to enlarge
        fp hta 3071's, forge ic's, Sachs 2.5 single disc

        Under 10k Click here to enlarge

        Click here to enlarge Originally Posted by LostMarine Click here to enlarge
        damn.. makes ya wonder why build anything else Click here to enlarge
        Go get one son! I have a local tuner set up for you Click here to enlarge
      1. RnmEvo9's Avatar
        RnmEvo9 -
        Goddamn and here I wanted a lightly used C6 z06 next, but a used 996tt sounds just as tempting. Love it, thanks for the video.
      1. bmw335iguy's Avatar
        bmw335iguy -
        So you spent under 10k to go from stock to where you are now? What's a fair price for a good condition 996tt? I haven't looked much but seems there around 40k. Debating whether I should stick with a 335i and Vargas stage 3's when they come out or jump ship to a p car... Have you ever tested your 60-130?
      1. M3ntal's Avatar
        M3ntal -
        Click here to enlarge Originally Posted by RnmEvo9 Click here to enlarge
        Goddamn and here I wanted a lightly used C6 z06 next, but a used 996tt sounds just as tempting. Love it, thanks for the video.
        A c6z06 is a great car. H/C/I and you're making close to 600 and trapping in the 130s. When I was on pump gas at 1.2 bar my buddies H/C/I z06 was pretty much dead even with me. At the current power level I'm at now I think I'd walk him pretty easily. There's just something sexy about a really fast Porsche IMHO.

        Click here to enlarge Originally Posted by bmw335iguy Click here to enlarge
        So you spent under 10k to go from stock to where you are now? What's a fair price for a good condition 996tt? I haven't looked much but seems there around 40k. Debating whether I should stick with a 335i and Vargas stage 3's when they come out or jump ship to a p car... Have you ever tested your 60-130?
        Granted I did all the work myself in my little garage, yes that is what I spent. Stock motor, stock manifolds, and stock Y-pipe....You can find them for around 40k. Buy from an older guy and most likely it'll have low miles and be in fantastic shape. They have a few small issues but the drivetrain is over-engineered and can take the power. You won't regret it Click here to enlarge
      1. M3ntal's Avatar
        M3ntal -
        Btw my best 60-130 is in the high 5s but it wasn't on my kill tune which makes 718 whp. It was with about 675-680 whp.
      1. Sledgehammer's Avatar
        Sledgehammer -
        Looking forward to a run in 2013 when I am done for a bar to measure myself with. Great ride for sure bro love the way it sounds in person
      1. M3ntal's Avatar
        M3ntal -
        Click here to enlarge Originally Posted by Sledgehammer Click here to enlarge
        Looking forward to a run in 2013 when I am done for a bar to measure myself with. Great ride for sure bro love the way it sounds in person
        Thanks man. Good luck with your project I've been checking it out here and there on Facebook.
      1. Sledgehammer's Avatar
        Sledgehammer -
        Just talked the shop today I was almost swap blocks today but ended up realizing it wouldnt work the way I intended. But I spoke with the builder waiting on my spec'd cam to arrive next week and should begin assembly next week. Figure by Mid-Jan to have it running with a base tune and some mild break in driving. Then a full tune.. Very excited

        I gotta tell you though that 1/4 time is really impressive