• USP Motorsports 996TT Turbo Inlet Pipes offer gains in the ~30 whp range for $849.00

      Here is a very affordable part for 996 Turbo Porsches from USP Motorsports. Their Turbo Inlet Pipes replace the restrictive factory turbo inlet pipes. These are 2.5 inches in diameter which will give improved torque and horsepower throughout the powerband. The gains will vary depending on mods but on a low boost tuned setup the USP turbo inlet made a difference in power of 33 wheel horsepower while dropping boost/backpressure by almost 2 psi.

      On a higher boost setup the difference in restriction between the factory Porsche pipes and the USP pipes is even more pronounced as the dyno graphs below show. At $849, this is a very affordable piece of hardware offering nice gains.







      This article was originally published in forum thread: USP Motorsports 996TT Turbo Inlet Pipes offer gains in the ~30 whp range for $849.00 started by Sticky View original post
      Comments 4 Comments
      1. c32AMG-DTM's Avatar
        c32AMG-DTM -
        These are nice inlet pipes, but they are not new. USP first started making these over two years ago, IIRC.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by c32AMG-DTM Click here to enlarge
        These are nice inlet pipes, but they are not new. USP first started making these over two years ago, IIRC.
        Yes but they recently posted an update and I had no thread on them so here we are.
      1. dzenno@PTF's Avatar
        dzenno@PTF -
        How small are the original ones? Any pics of the stockers?
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by dzenno@ProTUNING Freaks Click here to enlarge
        How small are the original ones? Any pics of the stockers?
        I'm sure there are some good shots somewhere but this is a good upgrade for a well known area of restriction.