• Fabspeed R8 5.2 FSI V10 exhaust + tune dyno results - +41 wheel horsepower

                    
      		   
      Published on 07-19-2012 08:31 AM
      3 Comments Comments
      Here are dyno resutls for the Fabspeed R8 5.2 FSI exhaust. The exhaust itself provides 10 wheel horsepower at peak and 16 wheel horsepower in the mid range. The baseline was 464 wheel horsepower and after the exhaust the car hit 473 to the wheels at peak. The exhaust retails for $3,195 and saves 41.8 pounds from the back of the car. Combined with an ECU tune the car hits 505 wheel horsepower for a respectable gain of 41 all wheel horsepower. A tune an exhaust are definitely worthy upgrades for any R8 5.2 owner to look into.








      Exhaust only dyno:



      Exhaust and tune:


      This article was originally published in forum thread: Fabspeed R8 5.2 FSI V10 exhast and exhaust + tune dyno results - +41 wheel horsepower started by Sticky View original post
      Comments 3 Comments
      1. LostMarine's Avatar
        LostMarine - 07-19-2012, 09:24 AM
        40hp gained and 40 lbs shed? thats a good investment, and something that V8 needs
      1. Sticky's Avatar
        Sticky - 07-19-2012, 09:30 AM
        Click here to enlarge Originally Posted by LostMarine Click here to enlarge
        40hp gained and 40 lbs shed? thats a good investment, and something that V8 needs
        It's a very nice upgrade when combined with a tune. If I had one I would definitely get the tune and exhaust.
      1. Sorena's Avatar
        Sorena - 07-22-2012, 02:41 PM
        Very nice. 5.2 is detuned from the factory, there is 30hp availablle with just pushing the tune to Gallardo's level.