• Vishnu Tuning sets a new N54 horsepower record with a dyno of 626 wheel provided by the Vishnu single turbo setup

      The N54 had been stuck in a bit of a rut. There were upgraded turbo options out there but these were relegated to small twins often utilizing the stock housing. A large single turbo simply was necessary to take it to the next level. All the previous attempts at large single turbos had been abandoned. Vishnu showed it is in fact possible and at 22.5 PSI with 94 octane fuel and meth broke the 600 wheel horsepower barrier with a very impressive run hitting 626 although the graph was uncorrected.

      How much further can the Vishnu single turbo kit go? Well, the single turbo is being run on the stock MAP sensor so 22.5 psi appears to be the current limit. Once this is bypassed it will be interesting to see how much further the fuel system and turbo can go. Congratulations for a major development for the platform and for it to finally get the push forward it was needing and deserving. We expect Horsepower Freaks to have a very similar offering based on this same Vishnu tuning solution.

      Video of the car in action below.



      This article was originally published in forum thread: Vishnu Tuning sets a new N54 horsepower record with a dyno of 626 wheel provided by the Vishnu single turbo setup started by Sticky View original post
      Comments 68 Comments
      1. Terry@BMS's Avatar
        Terry@BMS -
        I know it's taking forever but CPE's setup will be worth the wait. Proper cast parts FTW.
      1. dzenno@PTF's Avatar
        dzenno@PTF -
        Click here to enlarge Originally Posted by Terry@BMS Click here to enlarge
        I know it's taking forever but CPE's setup will be worth the wait. Proper cast parts FTW.
        Proper spool too...i want BIG TWINS! (no pun intended, don't really want twins at this point in my life) or a BIG twin-scroll...
      1. fundahl's Avatar
        fundahl -
        Nothing like a nice big pair of..... turbos. Click here to enlarge
      1. ultimateracing335i's Avatar
        ultimateracing335i -
        Have you spoken to them??? I really want to do something. How far away are they???
      1. orange's Avatar
        orange -
        Click here to enlarge Originally Posted by Terry@BMS Click here to enlarge
        I know it's taking forever but CPE's setup will be worth the wait. Proper cast parts FTW.
        Any more info on this kit Terry?
      1. dzenno@PTF's Avatar
        dzenno@PTF -
        Click here to enlarge Originally Posted by ultimateracing335i Click here to enlarge
        Have you spoken to them??? I really want to do something. How far away are they???
        dude, where's Kevin?
      1. ultimateracing335i's Avatar
        ultimateracing335i -
        Kevin is ready for me. I talked to him today.
      1. dzenno@PTF's Avatar
        dzenno@PTF -
        Click here to enlarge Originally Posted by ultimateracing335i Click here to enlarge
        Kevin is ready for me. I talked to him today.
        Hopefully I get my exhaust cutouts this week and get them installed...we can meet up at Champion next Saturday for coffee